11. Modélisation I

11.1. Caractéristiques de la modélisation

Eléments axis (TRIA6 + QUAD8)

Conditions limites :

côté \(\mathrm{AB}\)	DDL_IMPO:	( Group_no:GRNM11	Dy: 0. )
côté \(\mathrm{EF}\)	FACE_IMPO:	( Group_ma:GRMA12	Dnor: 0. )
pression sur \(\mathrm{AE}\)	PRES_REP:	( Group_ma:GRMA13	Pres: 1. )

Noms des nœuds :

\(A=\mathrm{N8}\)

\(B=\mathrm{N174}\)

\(C=\mathrm{N5}\)

\(D=\mathrm{N170}\)

\(E=\mathrm{N3}\)

\(F=\mathrm{N159}\)

11.2. Caractéristiques du maillage

Nombre de noeuds: 175

Nombre de mailles et types : 20 QUAD840 TRIA6

11.3. Grandeurs testées et résultats

Localisation	Grandeurs	Référence	Aster	% différence	tolérance
A		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3397 10–3 eps –0.9984 0.20055 1.669 eps	–0.00 –0.16 - –0.57 -	10–2 10–2 10–2 10–2 10–2 10–2
C		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3397 10–3 eps –0.9984 0.20055 1.669 eps	–0.00 –0.16 - –0.57 -	10–2 10–2 10–2 10–2 10–2 10–2
E		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3397 10–3 eps –0.9984 0.20055 1.669 eps	–0.00 –0.16 - –0.57 -	10–2 10–2 10–2 10–2 10–2 10–2
B		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6716 10–3 eps 3.8 10–4 0.2002 0.66716 10–5	0.00 –0.03 -	10–2 10–2 10–2 10–2 10–2 10–2
D		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6716 10–3 eps 3.8 10–4 0.2002 0.66716 eps	0.00 –0.03 -	10–2 10–2 10–2 10–2 10–2 10–2
F		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6716 10–3 eps 3.8 10–4 0.2002 0.66716 10–5	0.00 –0.03 -	10–2 10–2 10–2 10–2 10–2 10–2