8. Modélisation F

8.1. Caractéristiques de la modélisation

Eléments D_PLAN (QUAD8 + TRIA6)

Conditions limites :

côté \(\mathrm{AB}\)	DDL_IMPO:	( Group_no:GRNM11	Dy: 0. )
côté \(\mathrm{EF}\)	FACE_IMPO:	( Group_ma:GRMA12	Dnor: 0. )
pression sur \(\mathrm{AE}\)	PRES_REP:	( Group_ma:GRMA13	Pres: 1. )

Noms des nœuds :

\(A=\mathrm{N2}\)

\(B=\mathrm{N361}\)

\(C=\mathrm{N121}\)

\(D=\mathrm{N584}\)

\(E=\mathrm{N155}\)

\(F=\mathrm{N503}\)

8.2. Caractéristiques du maillage

Nombre de noeuds: 591

Nombre de mailles et types : 200 TRIA650 QUAD8

8.3. Grandeurs testées et résultats

Localisation	Grandeurs	Référence	Aster	% différence	tolérance
A		7.3398 10–3 1.6685 –1. 0.20055 0.	7.3326 10–3 1.6669 –0.9959 0.20129 0.00332	–0.10 0.09 0.41 0.37 -	10–2 10–2 10–2 10–2 10–2 10–2
C		–2.80882 10–3 6.78109 10–3 1.27771 –0.60921 0.20055 0.94346	–2.8063 10–3 6.7745 10–3 1.27799 –0.60779 0.20106 0.94027	–0.09 –0.10 0.02 0.23 0.25 –0.34	10–2 10–2 10–2 10–2 10–2 10–2
E		–5.19002 10–3 5.19002 10–3 0.33425 0.33425 0.20055 1.33425	–5.1851 10–3 5.1851 10–3 0.33462 0.33403 0.20059 1.33117	–0.09 –0.09 0.11 –0.066 0.02 –0.23	10–2 10–2 10–2 10–2 10–2 10–2
B		4.6716 10–3 0.66738 0. 0.20021 0.	eps 4.6682 10–3 0.66758 0.00033 0.20037 –5.1132 10–4	–0.07 0.03 - 0.08 -	10–2 10–2 10–2 10–2 10–2 10–2
D		–1.79157 10–3 4.32523 10–3 0.56964 0.09774 0.20021 0.23595	–1.7865 10–3 4.3129 10–3 0.56962 0.09805 0.200298 0.23623	–0.28 –0.28 –0.003 0.32 0.044 0.12	10–2 10–2 10–2 10–2 10–2 10–2
F		–3.31039 10–3 3.31039 10–3 0.33369 0.33369 0.20021 0.33369	–3.3009 10–3 3.3009 10–3 0.33371 0.33366 0.20021 0.33392	–0.29 –0.29 0.006 –0.009 0. 0.069	10–2 10–2 10–2 10–2 10–2 10–2