10. Modélisation H

10.1. Caractéristiques de la modélisation

Eléments axis (TRIA3 + QUAD4)

Conditions limites :

côté \(\mathrm{AB}\)	DDL_IMPO:	( Group_no:GRNM11	Dy: 0. )
côté \(\mathrm{EF}\)	FACE_IMPO:	( Group_ma:GRMA12	Dnor: 0. )
pression sur \(\mathrm{AE}\)	PRES_REP:	( Group_ma:GRMA13	Pres: 1. )

Noms des nœuds :

\(A=\mathrm{N111}\)

\(B=\mathrm{N1}\)

\(C=\mathrm{N112}\)

\(D=\mathrm{N3}\)

\(E=\mathrm{N113}\)

\(F=\mathrm{N4}\)

10.2. Caractéristiques du maillage

Nombre de noeuds: 113

Nombre de mailles et types : 40 QUAD480 TRIA3

10.3. Grandeurs testées et résultats

Localisation	Grandeurs	Référence	Aster	% différence	tolérance
A		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3390 10–3 eps –0.9430 0.2248 1.6923 eps	–0.01 –5.72 12.19 1.46 -	10–2 0.2 0.2 0.2 0.2
C		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3390 10–3 eps –0.9430 0.2248 1.6923 eps	–0.01 –5.72 12.19 1.46 -	10–2 0.2 0.2 0.2 0.2
E		7.3398 10–3 0. –1. 0.20055 1.6685 0.	7.3390 10–3 0. –0.9430 0.2248 1.6923 eps	–0.01 –5.72 12.19 1.46 -	10–2 0.2 0.2 0.2 0.2
B		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6713 10–3 eps –0.0110 0.1954 0.6625 –0.0011	–0.01 –2.35 –0.72 -	10–2 0.05 0.05 0.05 0.05
D		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6713 10–3 eps –0.0110 0.1954 0.6625 eps	–0.01 –2.35 –0.72 -	10–2 0.05 0.05 0.05 0.05
F		4.6716 10–3 0. 0. 0.20021 0.66738 0.	4.6713 10–3 eps –0.0110 0.1954 0.6625 +0.0011	–0.01 –2.35 –0.72 -	10–2 0.05 0.05 0.05 0.05