9. Modélisation G

9.1. Caractéristiques de la modélisation

D_PLAN (QUAD9)

Conditions limites :

côté \(\mathrm{AB}\)	DDL_IMPO:	( Group_no:GRNM11	Dy: 0. )
côté \(\mathrm{EF}\)	FACE_IMPO:	( Group_ma:GRMA12	Dnor: 0. )
pression sur \(\mathrm{AE}\)	PRES_REP:	( Group_ma:GRMA13	Pres: 1. )

Noms des nœuds :

\(A=\mathrm{N1}\)

\(B=\mathrm{N347}\)

\(C=\mathrm{N21}\)

\(D=\mathrm{N432}\)

\(E=\mathrm{N39}\)

\(F=\mathrm{N229}\)

9.2. Caractéristiques du maillage

Nombre de noeuds: 441

Nombre de mailles et types : 100 QUAD9

9.3. Grandeurs testées et résultats

Localisation	Grandeurs	Référence	Aster	% différence	tolérance
A		7.3398 10–3 0. –1. 1.6685 0.20055 0.	7.3329 10–3 eps –0.9968 1.6655 0.20059 –2.97 10–4	–0.09 0.32 –0.18 0.02 -	10–2 10–2 10–2 10–2 10–2 10–2
C		6.78109 10–3 2.80882 10–3 –0.60921 1.27771 0.20055 –0.94346	6.7747 10–3 2.8062 10–3 –0.60695 1.27563 0.20060 –0.94128	–0.09 –0.09 0.37 –0.16 0.02 –0.23	10–2 10–2 10–2 10–2 10–2 10–2
E		5.19002 10–3 5.19002 10–3 0.33425 0.33425 0.20055 –1.33425	5.1851 10–3 5.1851 10–3 0.33403 0.33463 0.20059 –1.33117	–0.09 –0.09 –0.06 0.11 0.02 0.23	10–2 10–2 10–2 10–2 10–2 10–2
B		4.6716 10–3 0. 0. 0.66738 0.20021 0.	4.6682 10–3 eps –2.394 10–3 0.66759 0.200207 –2.65 10–5	–0.07 0.03 –0.001 -	10–2 10–2 10–2 10–2 10–2 10–2
D		4.32523 10–3 1.79157 10–3 0.09774 0.56964 0.20021 –0.23595	4.3128 10–3 1.7864 10–3 0.09756 0.56979 0.200206 –0.23611	–0.29 –0.29 –0.18 0.02 –0.002 –0.07	10–2 10–2 10–2 10–2 10–2 10–2
F		3.31039 10–3 3.31039 10–3 0.33369 0.33369 0.20021 –0.33369	3.3009 10–3 3.3009 10–3 0.33366 0.33371 0.20021 –0.33392	–0.29 –0.29 –0.009 0.006 0. –0.07	10–2 10–2 10–2 10–2 10–2 10–2