4. Résultats de la modélisation A

4.1. Valeurs testées

Identification	Référence	Aster	% différence	tolérance
Température \((°C)\)
Noeud N1 \(t=\mathrm{0.1s}\)	0.330	0.329	 0.204%	1%
“ “ t = 0.3s	0.544	0.544	 0.048%	1%
“ “ t = 0.5s	0.682	0.681	 0.075%	1%
“ “ t = 0.7s	0.789	0.789	 0.036%	1%
“ “ t = 1.0s	0.918	0.920	0.254%	1%
Noeud N3 \(t=\mathrm{0.1s}\)	0.330	0.329	 0.204%	1%
“ “ t = 0.3s	0.544	0.544	 0.048%	1%
“ “ t = 0.5s	0.682	0.681	 0.075%	1%
“ “ t = 0.7s	0.789	0.789	 0.036%	1%
“ “ t = 1.0s	0.918	0.920	0.254%	1%
Noeud N61 \(t=\mathrm{0.1s}\)	0.004	0.004	1.161%	1%
“ “ t = 0.3s	0.071	0.071	 0.377%	1%
“ “ t = 0.5s	0.160	0.161	0.573%	1%
“ “ t = 0.7s	0.247	0.251	1.616%	1%
“ “ t = 1.0s	0.366	0.380	3.951%	1%
Noeud N63 \(t=\mathrm{0.1s}\)	0.004	0.004	1.161%	1%
“ “ t = 0.3s	0.071	0.071	 0.377%	1%
“ “ t = 0.5s	0.160	0.161	0.573%	1%
“ “ t = 0.7s	0.247	0.251	1.616%	1%
“ “ t = 1.0s	0.366	0.380	3.951%	1%

4.2. Remarques

L’erreur relative est au maximum de 3.9%.