24. Modélisation V#

24.1. Caractéristiques de la modélisation#

Élément de coque quadrangulaire et triangulaire DKTG.

Conditions limites :

DDL_IMPO

(GROUP_NO: AB, DX: 0.,DZ: 0.,DRY:0.)

(GROUP_NO: BC, DY: 0.,DZ: 0.,DRX:0.)

(GROUP_NO: CD, DX: 0.,DZ: 0.,DRY:0.)

(GROUP_NO: DA, DY: 0.,DZ: 0.,DRX:0.)

(GROUP_NO: O , DX: 0.,DY: 0.,DRX:0.,DRY:0.,DRZ:0.)

FORCE_ARETE

(GROUP_NO: AB MY:0.)

(GROUP_NO: BC MX:0.)

(GROUP_NO: CD MY:0.)

(GROUP_NO: DA MX:0.)

Nombre de nœuds : 171

Nombre de mailles et type : 72 QUAD4 , 144 TRIA3

Identification
Point \(O\)	\((\mathit{M258})\)	\(N_{xx}\) , \(N_{yy}\) , \(N_{xy}\) , \({M}_{xx}\) , \({M}_{yy}\) et \({M}_{xy}\) , \({T}_{x}\) , \({T}_{y}\)
		Énergie élastique : \(\mathit{TOTALE}\) \(\mathit{MEMBRANE}\) \(\mathit{FLEXION}\)
	\((\mathit{M54})\)	\(T_{x}\) , \(T_{y}\)
	\((\mathit{M126})\)	\(T_{x}\) , \(T_{y}\)
	\(\mathit{DZ}\)

Identification
Point \(\mathit{C}\)	\((\mathit{M108})\)	\({N}_{xx}\) , \({N}_{yy}\) , \({N}_{xy}\) , \({M}_{xx}\) , \({M}_{yy}\) , \({M}_{xy}\) , \({T}_{x}\) , \({T}_{y}\)