/ evol_noli
/ evol_ther
/ table = MACR_ECREVISSE(
◇ reuse = <objet de ETAT_INIT/EVOL_NOLI>,
◇ TABLE = co,
◇ DEBIT = co,
/ TEMPER = co,
◇ / ETAT_INIT = _F(
◆ EVOL_NOLI = evol_noli,
◆ EVOL_THER = evol_ther,
◆ NUME_ORDRE = int,
),
◆ MODELE_MECA = modele,
◆ MODELE_THER = modele,
◆ FISSURE = _F(
◆ PREFIXE_FICHIER = text,
◆ GROUP_MA = grma,
◆ GROUP_NO_ORIG = grno,
◆ GROUP_NO_EXTR = grno,
◆ ZETA = float,
◆ RUGOSITE = float,
◇ TORTUOSITE = float (défaut: 1.0),
◆ OUVERT_REMANENTE = float,
◆ SECTION = / "ELLIPSE",
/ "RECTANGLE",
# Si: equal_to("SECTION", 'ELLIPSE')
◇ LISTE_COTES_BL = float,
◆ LISTE_VAL_BL = float,
# Si: equal_to("SECTION", 'RECTANGLE')
◇ LISTE_COTES_BL = float,
◆ LISTE_VAL_BL = float,
),
◆ ECOULEMENT = _F(
◆ / PRES_ENTREE = float,
/ PRES_ENTREE_FO = fonction / formule / nappe,
◆ / PRES_SORTIE = float,
/ PRES_SORTIE_FO = fonction / formule / nappe,
◆ FLUIDE_ENTREE = / 1,
/ 2,
/ 3,
/ 4,
/ 5,
/ 6,
# Si: equal_to("FLUIDE_ENTREE", 1)
◆ / TEMP_ENTREE = float,
/ TEMP_ENTREE_FO = fonction / formule / nappe,
# Si: equal_to("FLUIDE_ENTREE", 2)
◆ / TITR_MASS = float,
/ TITR_MASS_FO = fonction / formule / nappe,
# Si: equal_to("FLUIDE_ENTREE", 3)
◆ / TEMP_ENTREE = float,
/ TEMP_ENTREE_FO = fonction / formule / nappe,
# Si: equal_to("FLUIDE_ENTREE", 4)
◆ / TEMP_ENTREE = float,
/ TEMP_ENTREE_FO = fonction / formule / nappe,
◆ / PRES_PART = float,
/ PRES_PART_FO = fonction / formule / nappe,
# Si: equal_to("FLUIDE_ENTREE", 5)
◆ / TITR_MASS = float,
/ TITR_MASS_FO = fonction / formule / nappe,
◆ / PRES_PART = float,
/ PRES_PART_FO = fonction / formule / nappe,
# Si: equal_to("FLUIDE_ENTREE", 6)
◆ / TEMP_ENTREE = float,
/ TEMP_ENTREE_FO = fonction / formule / nappe,
),
◇ LIST_INST = listr8,
◆ MODELE_ECRE = _F(
◇ IVENAC = / 0 (par défaut),
/ 1,
◆ ECOULEMENT = / "GELE",
/ "SATURATION",
# Si: equal_to("ECOULEMENT", 'GELE')
◆ PRESS_EBULLITION = float,
◆ FROTTEMENT = / -1,
/ -2,
/ -3,
/ -4,
/ 0,
/ 1,
/ 11,
/ 12,
/ 13,
/ 14,
/ 2,
/ 21,
/ 22,
/ 23,
/ 24,
/ 3,
/ 4,
# Si: less_than('FROTTEMENT', 0)
◆ REYNOLDS_LIM = float,
◆ FROTTEMENT_LIM = float,
◆ TRANSFERT_CHAL = / -1,
/ -11,
/ -12,
/ -2,
/ 0,
/ 1,
/ 11,
/ 12,
/ 2,
# Si: less_than('TRANSFERT_CHAL', 0)
◆ XMINCH = float,
◆ XMAXCH = float,
),
◆ CONV_CRITERE = _F(
◆ TEMP_REF = float,
◆ PRES_REF = float,
◇ CRITERE = / "EXPLICITE",
/ "PRESS",
/ "TEMP",
/ "TEMP_PRESS" (par défaut),
# Si: equal_to("CRITERE", 'TEMP_PRESS') or equal_to("CRITERE", 'TEMP') or equal_to("CRITERE", 'PRESS')
◇ SUBD_NIVEAU = int (défaut: 3),
◇ SUBD_PAS_MINI = float,
◇ NUME_ORDRE_MIN = int (défaut: -1),
◇ PREC_CRIT = float (défaut: 1.0),
),
◇ CONVERGENCE_ECREVISSE = _F(
◇ KGTEST = float (défaut: 0.5),
◇ ITER_GLOB_MAXI = int (défaut: 400),
◇ CRIT_CONV_DEBI = float (défaut: 1e-05),
),
◇ COURBES = / "AUCUNE" (par défaut),
/ "INTERACTIF",
/ "POSTSCRIPT",
◆ / LOGICIEL = text,
/ VERSION = "3.2.2" (ou non renseigné),
◇ ENTETE = text (défaut: "Titre du calcul Ecrevisse"),
◇ IMPRESSION = / "NON" (par défaut),
/ "OUI",
◇ INFO = / 1 (par défaut),
/ 2,
◆ CHAM_MATER = cham_mater,
◆ TEMP_INIT = float,
◇ CARA_ELEM = cara_elem,
◆ EXCIT_MECA = _F(
◆ CHARGE = char_cine_meca / char_meca,
◇ FONC_MULT = fonction / formule / nappe,
◇ TYPE_CHARGE = / "DIDI",
/ "FIXE_CSTE" (par défaut),
/ "SUIV",
),
◆ CONTACT = char_contact,
⟐ COMPORTEMENT = _F(
# Si: is_in("RELATION", ('VMIS_ISOT_LINE','VMIS_ISOT_TRAC','VISCOCHAB','VISC_ISOT_LINE','VISC_ISOT_TRAC',))
◇ POST_ITER = "CRIT_RUPT" (ou non renseigné),
# Si: is_in("RELATION", ('VMIS_ISOT_LINE','VMIS_CINE_LINE','VMIS_ECMI_LINE','VMIS_ISOT_TRAC','VMIS_CIN1_CHAB','VMIS_CIN2_CHAB'))
◇ POST_INCR = / "REST_ECRO",
/ "SANS",
◆ / TOUT = "OUI" (ou non renseigné),
/ GROUP_MA = grma,
◇ RELATION = / "ARME",
/ "ASSE_CORN",
/ "BETON_BURGER",
/ "BETON_DOUBLE_DP",
/ "BETON_GRANGER",
/ "BETON_GRANGER_V",
/ "BETON_RAG",
/ "BETON_REGLE_PR",
/ "BETON_UMLV",
/ "Barcelone",
/ "CABLE",
/ "CABLE_GAINE_FROT",
/ "CAM_CLAY",
/ "CHOC_ELAS_TRAC",
/ "CHOC_ENDO",
/ "CHOC_ENDO_PENA",
/ "CJS",
/ "CORR_ACIER",
/ "CSSM",
/ "CZM_ELAS_MIX",
/ "CZM_EXP_MIX",
/ "CZM_EXP_REG",
/ "CZM_FAT_MIX",
/ "CZM_LAB_MIX",
/ "CZM_LIN_REG",
/ "CZM_OUV_MIX",
/ "CZM_TAC_MIX",
/ "CZM_TRA_MIX",
/ "CZM_TURON",
/ "DASHPOT",
/ "DHRC",
/ "DIS_BILI_ELAS",
/ "DIS_CHOC",
/ "DIS_CONTACT",
/ "DIS_ECRO_CINE",
/ "DIS_ECRO_TRAC",
/ "DIS_GOUJ2E_ELAS",
/ "DIS_GOUJ2E_PLAS",
/ "DIS_GRICRA",
/ "DIS_VISC",
/ "DRUCK_PRAGER",
/ "DRUCK_PRAG_N_A",
/ "ELAS" (par défaut),
/ "ELAS_HYPER",
/ "ELAS_HYPER_VISC",
/ "ELAS_MEMBRANE_NH",
/ "ELAS_MEMBRANE_SV",
/ "ELAS_POUTRE_GR",
/ "ELAS_VMIS_LINE",
/ "ELAS_VMIS_PUIS",
/ "ELAS_VMIS_TRAC",
/ "ENDO_CARRE",
/ "ENDO_FISS_EXP",
/ "ENDO_HETEROGENE",
/ "ENDO_ISOT_BETON",
/ "ENDO_LOCA_EXP",
/ "ENDO_LOCA_TC",
/ "ENDO_ORTH_BETON",
/ "ENDO_PORO_BETON",
/ "ENDO_SCALAIRE",
/ "FLUA_ENDO_PORO",
/ "FLUA_PORO_BETON",
/ "FONDATION",
/ "GLRC_DAMAGE",
/ "GLRC_DM",
/ "GRAN_IRRA_LOG",
/ "GRILLE_CINE_LINE",
/ "GRILLE_ISOT_LINE",
/ "GRILLE_PINTO_MEN",
/ "GTN",
/ "GonfElas",
/ "HAYHURST",
/ "HOEK_BROWN",
/ "HOEK_BROWN_EFF",
/ "HOEK_BROWN_TOT",
/ "HUJEUX",
/ "IRRAD3M",
/ "Iwan",
/ "JOINT_BA",
/ "JOINT_BANDIS",
/ "JOINT_MECA_ENDO",
/ "JOINT_MECA_FROT",
/ "JOINT_MECA_RUPT",
/ "JONC_ENDO_PLAS",
/ "KICHENIN_NL",
/ "KIT_CG",
/ "KIT_DDI",
/ "KIT_H",
/ "KIT_HH",
/ "KIT_HH2",
/ "KIT_HH2M",
/ "KIT_HHM",
/ "KIT_HM",
/ "KIT_THH",
/ "KIT_THH2",
/ "KIT_THH2M",
/ "KIT_THHM",
/ "KIT_THM",
/ "KIT_THV",
/ "LAIGLE",
/ "LEMAITRE",
/ "LEMAITRE_IRRA",
/ "LEMA_SEUIL",
/ "LETK",
/ "LKR",
/ "MAZARS",
/ "MAZARS_UNIL",
/ "MCC",
/ "META_LEMA_ANI",
/ "META_LEMA_ANI",
/ "META_P_CL",
/ "META_P_CL_PT",
/ "META_P_CL_PT_RE",
/ "META_P_CL_RE",
/ "META_P_IL",
/ "META_P_IL_PT",
/ "META_P_IL_PT_RE",
/ "META_P_IL_RE",
/ "META_P_INL",
/ "META_P_INL_PT",
/ "META_P_INL_PT_RE",
/ "META_P_INL_RE",
/ "META_V_CL",
/ "META_V_CL_PT",
/ "META_V_CL_PT_RE",
/ "META_V_CL_RE",
/ "META_V_IL",
/ "META_V_IL_PT",
/ "META_V_IL_PT_RE",
/ "META_V_IL_RE",
/ "META_V_INL",
/ "META_V_INL_PT",
/ "META_V_INL_PT_RE",
/ "META_V_INL_RE",
/ "MFRONT",
/ "MOHR_COULOMB",
/ "MONOCRISTAL",
/ "MULTIFIBRE",
/ "MetaAcierEPIL_PT",
/ "MohrCoulombAS",
/ "NLH_CSRM",
/ "NORTON",
/ "NORTON_HOFF",
/ "PINTO_MENEGOTTO",
/ "POLYCRISTAL",
/ "RANKINE",
/ "RELAX_ACIER",
/ "RGI_BETON",
/ "RGI_BETON_BA",
/ "ROUSSELIER",
/ "ROUSS_PR",
/ "ROUSS_VISC",
/ "RUPT_FRAG",
/ "SANS",
/ "UMAT",
/ "VENDOCHAB",
/ "VISCOCHAB",
/ "VISC_CIN1_CHAB",
/ "VISC_CIN2_CHAB",
/ "VISC_CIN2_MEMO",
/ "VISC_CIN2_NRAD",
/ "VISC_DRUC_PRAG",
/ "VISC_ENDO_LEMA",
/ "VISC_GTN",
/ "VISC_IRRA_LOG",
/ "VISC_ISOT_LINE",
/ "VISC_ISOT_NL",
/ "VISC_ISOT_TRAC",
/ "VISC_MAXWELL",
/ "VISC_MAXWELL_MT",
/ "VISC_MEMO_NRAD",
/ "VISC_TAHERI",
/ "VMIS_ASYM_LINE",
/ "VMIS_CIN1_CHAB",
/ "VMIS_CIN2_CHAB",
/ "VMIS_CIN2_MEMO",
/ "VMIS_CIN2_NRAD",
/ "VMIS_CINE_GC",
/ "VMIS_CINE_LINE",
/ "VMIS_CINE_LINE",
/ "VMIS_ECMI_LINE",
/ "VMIS_ECMI_TRAC",
/ "VMIS_ISOT_LINE",
/ "VMIS_ISOT_NL",
/ "VMIS_ISOT_PUIS",
/ "VMIS_ISOT_TRAC",
/ "VMIS_JOHN_COOK",
/ "VMIS_MEMO_NRAD",
◇ REGU_VISC = / "NON" (par défaut),
/ "OUI",
# Si: equal_to("RELATION", 'MONOCRISTAL')
◆ COMPOR = compor,
# Si: equal_to("RELATION", 'MULTIFIBRE')
◇ RIGI_GEOM = / "DEFAUT" (par défaut),
/ "OUI",
# Si: equal_to("RELATION", 'POLYCRISTAL')
◆ COMPOR = compor,
# Si: equal_to("RELATION", 'UMAT')
◆ NB_VARI = int,
◆ LIBRAIRIE = text,
◆ NOM_ROUTINE = text,
# Si: equal_to("RELATION", 'MFRONT')
◆ COMPOR_MFRONT = compor_mgis,
◇ VERI_BORNE = / "ARRET" (par défaut),
/ "MESSAGE",
/ "SANS",
◇ ALGO_CPLAN = / "ANALYTIQUE",
/ "DEBORST" (par défaut),
◇ SYME_MATR_TANG = / "NON",
/ "OUI" (par défaut),
# Si: not equal_to('RELATION', 'MFRONT')
# Si: equal_to("RELATION", 'KIT_DDI')
◆ RELATION_KIT = / "BETON_DOUBLE_DP",
/ "BETON_GRANGER",
/ "BETON_GRANGER_V",
/ "BETON_UMLV",
/ "ENDO_ISOT_BETON",
/ "GLRC_DM",
/ "MAZARS",
/ "ROUSS_PR",
/ "VMIS_CINE_LINE",
/ "VMIS_ISOT_LINE",
/ "VMIS_ISOT_PUIS",
/ "VMIS_ISOT_TRAC",
# Si: equal_to("RELATION", 'KIT_CG')
◆ RELATION_KIT = / "CABLE_GAINE_FROT",
/ "ELAS",
/ "PINTO_MENEGOTTO",
/ "SANS",
/ "VMIS_CINE_LINE",
/ "VMIS_ISOT_LINE",
/ "VMIS_ISOT_TRAC",
# Si: is_in("RELATION", ['KIT_HHM','KIT_HH', 'KIT_H','KIT_HM','KIT_THHM', 'KIT_THH','KIT_THM','KIT_THV','KIT_THH2M','KIT_HH2M','KIT_HH2','KIT_THH2'])
◆ RELATION_KIT = / "Barcelone",
/ "CAM_CLAY",
/ "CJS",
/ "CSSM",
/ "CZM_EXP_REG",
/ "CZM_LIN_REG",
/ "DRUCK_PRAGER",
/ "DRUCK_PRAG_N_A",
/ "ELAS",
/ "ENDO_ISOT_BETON",
/ "GAZ",
/ "GonfElas",
/ "HOEK_BROWN_EFF",
/ "HOEK_BROWN_TOT",
/ "HUJEUX",
/ "HYDR_ENDO",
/ "HYDR_TABBAL",
/ "HYDR_UTIL",
/ "HYDR_VGC",
/ "HYDR_VGM",
/ "Iwan",
/ "JOINT_BANDIS",
/ "LAIGLE",
/ "LETK",
/ "LIQU_AD_GAZ",
/ "LIQU_AD_GAZ_VAPE",
/ "LIQU_GAZ",
/ "LIQU_GAZ_ATM",
/ "LIQU_SATU",
/ "LIQU_VAPE",
/ "LIQU_VAPE_GAZ",
/ "LKR",
/ "MAZARS",
/ "MCC",
/ "MFRONT",
/ "MOHR_COULOMB",
/ "NLH_CSRM",
/ "RANKINE",
/ "VISC_DRUC_PRAG",
/ "VISC_MAXWELL",
/ "VISC_MAXWELL_MT",
# Si: 'MFRONT' in value("RELATION_KIT")
◆ COMPOR_MFRONT = compor_mgis,
◇ VERI_BORNE = / "ARRET" (par défaut),
/ "MESSAGE",
/ "SANS",
◇ ALGO_CPLAN = / "ANALYTIQUE",
/ "DEBORST" (par défaut),
◇ RESI_INTE = float (défaut: 1e-08),
◇ ITER_INTE_MAXI = int,
◇ SYME_MATR_TANG = / "NON",
/ "OUI" (par défaut),
# Si: 'MFRONT' not in value("RELATION_KIT")
# Si: value("RELATION").startswith('META_') and not value("RELATION").startswith('META_LEMA_ANI')
◆ RELATION_KIT = / "ACIER",
/ "ZIRC",
◇ DEFORMATION = / "GDEF_LOG",
/ "GREEN_LAGRANGE",
/ "GROT_GDEP",
/ "PETIT" (par défaut),
/ "PETIT_REAC",
/ "SIMO_MIEHE",
◇ RESI_CPLAN_MAXI = float,
# Si: not exists("RESI_CPLAN_MAXI")
◇ RESI_CPLAN_RELA = float (défaut: 1e-06),
◇ ITER_CPLAN_MAXI = int (défaut: 10),
# Si: (equal_to("RELATION", 'MFRONT'))
◇ RESI_INTE = float,
◇ ITER_INTE_MAXI = int,
# Si: is_in("RELATION", ('RGI_BETON','FLUA_PORO_BETON','FLUA_ENDO_PORO', 'RGI_BETON_BA',))
◇ RESI_INTE = float (défaut: 1e-06),
◇ ITER_INTE_MAXI = int (défaut: -1),
# Si: not is_in("RELATION", ('MFRONT','RGI_BETON','FLUA_PORO_BETON','FLUA_ENDO_PORO','RGI_BETON_BA',))
◇ RESI_INTE = float (défaut: 1e-06),
◇ ITER_INTE_MAXI = int (défaut: 20),
# Si: is_in("DEFORMATION", ('PETIT','PETIT_REAC','GROT_GDEP'))
◇ ITER_INTE_PAS = int (défaut: 0),
◇ ALGO_INTE = / "ANALYTIQUE",
/ "BASCULE_EXPLICITE",
/ "BRENT",
/ "DEKKER",
/ "NEWTON",
/ "NEWTON_1D",
/ "NEWTON_PERT",
/ "NEWTON_RELI",
/ "RUNGE_KUTTA",
/ "SANS_OBJET",
/ "SECANTE",
/ "SEMI_EXPLICITE",
/ "SPECIFIQUE",
# Si: not is_in("RELATION", ('RGI_BETON','FLUA_PORO_BETON','FLUA_ENDO_PORO', 'RGI_BETON_BA', 'ENDO_PORO_BETON'))
◇ TYPE_MATR_TANG = / "PERTURBATION",
/ "VERIFICATION",
# Si: (exists("TYPE_MATR_TANG"))
◇ VALE_PERT_RELA = float (défaut: 1e-05),
# Si: equal_to("TYPE_MATR_TANG", 'TANGENTE_SECANTE')
◇ SEUIL = float (défaut: 3.0),
◇ AMPLITUDE = float (défaut: 1.5),
◇ TAUX_RETOUR = float (défaut: 0.05),
◇ PARM_THETA = float (défaut: 1.0),
# Si: not exists("TYPE_MATR_TANG")
◇ RESI_RADI_RELA = float,
# Si: is_in("RELATION", ('RGI_BETON','FLUA_PORO_BETON','FLUA_ENDO_PORO', 'RGI_BETON_BA', 'ENDO_PORO_BETON'))
◇ TYPE_MATR_TANG = / "MATR_ELAS" (par défaut),
/ "MATR_ENDO",
◇ PARM_THETA = float (défaut: 1.0),
# Si: not exists("TYPE_MATR_TANG")
◇ RESI_RADI_RELA = float,
),
⟐ NEWTON = _F(
◇ REAC_INCR = int (défaut: 1),
◇ PREDICTION = / "DEPL_CALCULE",
/ "ELASTIQUE",
/ "EXTRAPOL",
/ "TANGENTE",
◇ MATRICE = / "ELASTIQUE",
/ "TANGENTE" (par défaut),
◇ PAS_MINI_ELAS = float (défaut: 0.0),
◇ REAC_ITER = int (défaut: 0),
◇ REAC_ITER_ELAS = int (défaut: 0),
◇ EVOL_NOLI = evol_noli,
),
⟐ CONVERGENCE = _F(
# Si: exists("RESI_REFE_RELA")
◆ | SIGM_REFE = float,
| EPSI_REFE = float,
| FLUX_THER_REFE = float,
| FLUX_HYD1_REFE = float,
| FLUX_HYD2_REFE = float,
| VARI_REFE = float,
◇ / RESI_REFE_RELA = float,
/ | RESI_GLOB_MAXI = float,
| RESI_GLOB_RELA = float,
◇ ITER_GLOB_MAXI = int (défaut: 10),
◇ ITER_GLOB_ELAS = int (défaut: 25),
◇ ARRET = / "NON",
/ "OUI" (par défaut),
),
◇ ENERGIE = _F(
◇ CALCUL = "OUI",
),
◆ EXCIT_THER = _F(
◆ CHARGE = char_cine_ther / char_ther,
◇ FONC_MULT = fonction / formule / nappe,
),
)
◆ : obligatoire
◇ : optionnel
⟐ : présent par défaut
& : ensemble
/ : un seul parmi
| : plusieurs choix possibles