Welcome to the forums. Please post in English or French.

You are not logged in.

#51 2022-03-29 18:49:44

VonPire
Member
Registered: 2021-01-14
Posts: 33

Re: Questions about singularity version of salome_meca 2021

Hello,

Okay, I understand that.

The newest stable version seems to be 15.5.0 ? (htt ps://sourceforge.net/p/codeaster/src/ci/stable/tree/) If that doesn't work with the newest salome_meca 2021.0.0-2-20211014 container then try it with older salome_meca 2021.0.0-0-20210601 container. Hope it works ! smile

Best regards,
VonPire

Offline

#52 2022-03-30 16:41:27

mf
Member
Registered: 2019-06-18
Posts: 332

Re: Questions about singularity version of salome_meca 2021

Hello,

well, I was quite positive when everything compiled and built correctly (I had to --disable-petsc also). But in the end, there was no MUMPS compiled, which I overlooked. So, that doesn't work (15.5 and the newest container),

Mario.

Last edited by mf (2022-03-30 16:43:45)

Offline

#53 2022-04-17 03:15:34

linctus
Member
Registered: 2011-11-02
Posts: 35

Re: Questions about singularity version of salome_meca 2021

According to https: //gitlab.com/codeaster-opensource-documentation/opensource-installation-development/-/blob/main/devel/changelog.md there is comparability of aster and singularity container images.

starting from 16.0.12:
salome_meca-lgpl-2021.0.0-2-20211014-scibian-9

starting from 16.0.6:
salome_meca-lgpl-2021.0.0-1-20210811-scibian-9

starting from 16.0.0:
salome_meca-lgpl-2021.0.0-0-20210601-scibian-9

starting from 15.3.17:
salome_meca-lgpl-2021.0.0-0-20210601-scibian-9

Offline

#54 2022-04-28 11:41:37

drPcb
Member
Registered: 2022-04-28
Posts: 1

Re: Questions about singularity version of salome_meca 2021

Hallo!

I also tried the MPI compilation described in:

https: //github.com/emefff/Code-Aster-MPI-in-Singularity-of-SM2021

and by disabling MFRONT it worked (without disabling MFRONT I got an error message regarding META_LEMA_ANI.cxx).
However, after runnning:

singularity run --app install salome_meca-lgpl-2021.0.0-0-20210601-scibian-9.sif

./salome_meca-lgpl-2021.0.0-0-20210601-scibian-9

stops with:

OSError: [Errno 30] Read-only file system
singularity exit code: 1

Any suggestions what the problem is?

Many thanks in advance!

Offline

#55 2022-08-04 16:55:18

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 64

Re: Questions about singularity version of salome_meca 2021

Hello, I tried to download the container from

https:// cloud.sylabs.io/library/emefff/collection/code-aster-mpi-in-singularity-of-sm2021

,but the download does not start. Is something wrong with it?

Offline

#56 2022-08-05 16:58:49

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 64

Re: Questions about singularity version of salome_meca 2021

Ok I was able to download it and install it, but the MPI version is quite slower if I choose more CPU.
I have a small problem with linear mesh, but nonlinear study. Normally it takes about 10 min. So, I wont be able to reduce solution time since the problem is small? I would have to have many DOFs to notice performance increase?

Offline