select body/surface in paravis

jacob · 2022-03-29 21:10:59

Hello,
lets say I have done static study on an assembly. How do I show results only on some parts or surfaces?
(I mean automatically, not manually selecting cells and then extract selection. It is not possible on something complex)

Thanks

Irvise · 2022-03-29 21:35:18

Hi Jacob,

Code_Aster allows you to do post processing of the generated results on specific areas. Most (if not all) post-processing commands have a GROUP_MA or GROUP_NO to restrict the post processing of whatever you want to that group.

If you are talking about ParaVis/Paraview, you can use the threshold filter. It allows you to get rid of parts of the results depending on your criteria. If you have groups in your mesh, those will be present in the results. In the threshold filter select the filter to be based on FamilyCell or FamilyNode and tweak it to leave only the part that you actually want.

Regards,
Fer

jonas loenartz · 2022-03-30 07:35:58

Hello Jacob,

if you use Paravis for your post-processing you can also use the filter "extract groups", to isolate the values by mesh groups (GROUP_MA and GROUP_NO) you defined during the pre-processing. No need to choose cells in advance.

Jonas

jacob · 2022-03-30 08:34:05

Yes I tried that before I posted, but it does not show anything. I tried many models.

Attachments:
groups.jpg, Size: 123.6 KiB, Downloads: 165

jonas loenartz · 2022-03-30 13:39:35

The filter has so far not failed me. But your property-browser looks kind of strange to me, as if you are not using the filter on the right object. It looks like your result file is "leaf_spring_contact_AS.rmed" but you use it on some other object in the pipeline browser. You have to select the object you want to apply the filter to in your pipeline browser, so that it has a blue background.

it would help, if you could share the .rmed file

Jonas

Last edited by jonas loenartz (2022-03-30 13:44:19)

jacob · 2022-03-30 19:45:13

hmm on volme it works, but not on the surfaces.
However I have to prepare everything before solving I guess?

Last edited by jacob (2022-03-30 19:47:06)

Attachments:
two_blocks.7z, Size: 1.64 MiB, Downloads: 172

konyaro · 2022-03-30 20:35:19

Hello,
you can use the filter "Resample with dataset", refer to :
old.salome-platform.org/forum/forum_10/298627693#336367220

Konyaro

jonas loenartz · 2022-03-31 08:50:29

jacob wrote:

hmm on volme it works, but not on the surfaces.
However I have to prepare everything before solving I guess?

Ok, I was not able to to extract a group of surface-elements in your result file. General it shoud be possible (as you can see in the attached screenshot, where I did it with one of my models.)

I'll have a look into your model later when I have time, in order to check if everything defined correctly in there

Jonas

Last edited by jonas loenartz (2022-03-31 08:50:54)

Attachments:
some_picture.png, Size: 70.46 KiB, Downloads: 158

jacob · 2022-04-02 13:09:22

I tried it on Salome Meca 2021 on Xubuntu but it behaves the same. Only volume works.

konyaro · 2022-04-03 20:50:21

Ok, I was not able to to extract a group of surface-elements in your result file

This is explained in the Salome post I gave you above. Again, a workaround is to use the "Resample with dataset" filter.

jacob · 2022-04-03 22:19:12

I tried that but it also does not work.

Attachments:
image_2022-04-03_231906.png, Size: 68.67 KiB, Downloads: 126

konyaro · 2022-04-04 06:53:50

You must apply the "Extract Group" on the mesh (MED), not on the rmed result, and then link the extracted group to your result with the "Resample with dataset".

jacob · 2022-04-04 07:03:57

Yeah I realized later. But thanks anyway.

#1 2022-03-29 21:10:59

select body/surface in paravis

#2 2022-03-29 21:35:18

Re: select body/surface in paravis

#3 2022-03-30 07:35:58

Re: select body/surface in paravis

#4 2022-03-30 08:34:05

Re: select body/surface in paravis

#5 2022-03-30 13:39:35

Re: select body/surface in paravis

#6 2022-03-30 19:45:13

Re: select body/surface in paravis

#7 2022-03-30 20:35:19

Re: select body/surface in paravis

#8 2022-03-31 08:50:29

Re: select body/surface in paravis

#9 2022-04-02 13:09:22

Re: select body/surface in paravis

#10 2022-04-03 20:50:21

Re: select body/surface in paravis

#11 2022-04-03 22:19:12

Re: select body/surface in paravis

#12 2022-04-04 06:53:50

Re: select body/surface in paravis

#13 2022-04-04 07:03:57

Re: select body/surface in paravis

Board footer