Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2022-03-21 19:37:47

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 100

Semi-coherent meshed part

Hello,
how would one mesh a multi-body part with shared nodes, but exclude some adjacent faces from the meshing algorithm?

For example I wanna have common nodes between weld but not between sheets.

Thank you


Attachments:
weld_part.png, Size: 7.45 KiB, Downloads: 96

Offline

#2 2022-03-21 22:03:45

miib
Member
From: Near Goethe's Palm.
Registered: 2021-03-23
Posts: 250

Re: Semi-coherent meshed part

yes via code_aster using liasion_mail is possible :-)


Attachments:
yes is possible.zip, Size: 479.04 KiB, Downloads: 119

SE,Dio è il creatore di tutto, e tu credi in Dio, crederai anche che le formule della matematica e della fisica sono "linguaggi" che consentono di spiegare ciò che è stato creato da Dio (la natura) e che tali "linguaggi" sono essi stessi creazioni di Dio. Sarei stupito del contrario.

Offline

#3 2022-03-22 07:33:19

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 100

Re: Semi-coherent meshed part

liasion_mail creates just "bonded contact" between parts. I want to have common nodes.


Attachments:
shared topolgy on weld.jpg, Size: 150.69 KiB, Downloads: 91

Offline

#4 2022-03-22 15:42:29

dezsit
Member
Registered: 2012-06-27
Posts: 69
Website

Re: Semi-coherent meshed part

Hi,

Assuming you are using Salome, just partitioning your geom,
mesh it as one whole (this makes fully conformal mesh on all internal faces of the partitioned geometry),
then use the Duplicate Nodes or/and Elements from the menu Modification->Transformation.
Either the 1st or the 4th option could work, but require different preparation (grouping) and post treatment (re-merging of some nodes).

This process will result fully identical element shapes and node location on the both sides of your interface, but with duplicated nodes! The rest of your mesh is fully merged.

BR.
dezsit

Offline

#5 2022-03-22 19:19:46

miib
Member
From: Near Goethe's Palm.
Registered: 2021-03-23
Posts: 250

Re: Semi-coherent meshed part

like this ??? :-)


Attachments:
saldatura.png, Size: 479.7 KiB, Downloads: 79

SE,Dio è il creatore di tutto, e tu credi in Dio, crederai anche che le formule della matematica e della fisica sono "linguaggi" che consentono di spiegare ciò che è stato creato da Dio (la natura) e che tali "linguaggi" sono essi stessi creazioni di Dio. Sarei stupito del contrario.

Offline

#6 2022-03-22 23:18:12

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 100

Re: Semi-coherent meshed part

Yes. Could you upload hdf?

However I guess I solved it by using groups and node merge.
Groups are working quite well in salome so far.

Last edited by jacob (2022-03-22 23:21:37)

Offline

#7 2022-03-23 10:08:14

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 100

Re: Semi-coherent meshed part

figure


Attachments:
weld hex.jpg, Size: 72.34 KiB, Downloads: 95

Offline

#8 2022-03-23 10:31:37

jacob
Member
From: Dolní Benešov
Registered: 2022-03-07
Posts: 100

Re: Semi-coherent meshed part

rar


Attachments:
weld_hex_2.rar, Size: 79.35 KiB, Downloads: 101

Offline

#9 2022-03-23 20:07:53

miib
Member
From: Near Goethe's Palm.
Registered: 2021-03-23
Posts: 250

Re: Semi-coherent meshed part


SE,Dio è il creatore di tutto, e tu credi in Dio, crederai anche che le formule della matematica e della fisica sono "linguaggi" che consentono di spiegare ciò che è stato creato da Dio (la natura) e che tali "linguaggi" sono essi stessi creazioni di Dio. Sarei stupito del contrario.

Offline