[SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

Romans1988 · 2022-01-11 17:14:45

Hi to everyones,
i am performing a modal analysis that on 07/01/2022 going succefully to solution (and the results was the same obtained with Ansys).
Today, on 11/01/2022, after Windows update, i am obtaining this error:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! <S> Exception user raised but not interceptee. !
! The bases are fermees. !
! Type of the exception: error !
! !
! error LAPACK (or BLAS) on the level of the routine DLASCL !
! the parameter number 4 !
! does not have a coherent value 4 !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I don't know what it is. I am using codeaster for windows.
The strange thing is that if i impose Rigi_Meca both for M and K Matrix in calc_modes analysis the results go to solution.
Instead if i set Rigi_Meca as K Matrix and MAss_Meca as M Matrix, the solution give me this error.
I have also try to restore the pre-update version of windows but nothing changed.
I have perfomed a buckling analysis obtaining the right solution. So i think that the problem is regarding only the Dynamique algorithm used in Calc_Modes.
I attach the .comm file.
Thanks to all for the reply.

Last edited by Romans1988 (2022-01-12 10:00:22)

Attachments:
Analisi_Modale.comm, Size: 1.52 KiB, Downloads: 122

miib · 2022-01-11 20:16:57

mahhhh!!!!

sometime i do this:

go to AppData\Local\Temp , folder -> delete all.

after

reinstall the package.

:-)

Romans1988 · 2022-01-12 09:36:34

thanks for the reply.
I can't reinstall the package beacuse i am using codeaster_for_windows. So i don't know how it is possible install that package in a builted version of codeaster.

Romans1988 · 2022-01-12 10:00:04

I have set in "CALC_MODES > SOLVEUR_MODAL>METHODE>SORENSES" and the analysis go to results.
I don't understand how it is possibile.

miib · 2022-01-12 19:26:25

Romans1988 wrote:

thanks for the reply.
I can't reinstall the package beacuse i am using codeaster_for_windows. So i don't know how it is possible install that package in a builted version of codeaster.

now explain

miib · 2022-01-12 19:28:30

clear this

Attachments:
clear this.jpg, Size: 201.85 KiB, Downloads: 116

miib · 2022-01-12 19:30:18

re extract

Attachments:
re extract.jpg, Size: 155.37 KiB, Downloads: 112

miib · 2022-01-12 19:31:26

Romans1988 wrote:

I have set in "CALC_MODES > SOLVEUR_MODAL>METHODE>SORENSES" and the analysis go to results.
I don't understand how it is possibile.

happy 4u

#1 2022-01-11 17:14:45

[SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#2 2022-01-11 20:16:57

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#3 2022-01-12 09:36:34

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#4 2022-01-12 10:00:04

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#5 2022-01-12 19:26:25

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#6 2022-01-12 19:28:30

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#7 2022-01-12 19:30:18

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

#8 2022-01-12 19:31:26

Re: [SOLVED] error LAPACK (or BLAS) on the level of the routine DLASC

Board footer