Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2021-05-05 14:30:10

AlbiBone
Member
Registered: 2020-10-05
Posts: 20

How to remove perspective view from post-processor of Aster Study

I am working with the post-processor embedded into Aster Study (not ParaVIS, but the "Results" tab below "Case View").
How can I remove the "perspective" view and turn into "orthogonal" view?
In ParaVIS there is the botton 2D and 3D so it is simple to do, but in the post-processor of AsterStudy I can't find any way to remove perspective.

I am using Salome-Meca 2019.0.3 installed on Ubuntu operating system.

Thank you and best regards

Last edited by AlbiBone (2021-05-07 13:36:38)

Offline

#2 2021-07-20 20:29:39

seirov
Member
Registered: 2020-12-24
Posts: 20

Re: How to remove perspective view from post-processor of Aster Study

Just click one of the ortogonal view buttons (from 2nd to 4th in the attached image). First button is to came back to perpective view.


Attachments:
buttons.png, Size: 6.3 KiB, Downloads: 63

Offline

#3 2021-08-27 07:23:19

AlbiBone
Member
Registered: 2020-10-05
Posts: 20

Re: How to remove perspective view from post-processor of Aster Study

Maybe I did not explained well.

What you suggest dear seirov allows only to change view (lateral, upper/lower, frontal/real). It does not affect the perspective projection into ortographic projection of the view.

I want to remove the perspective projection (that create distorsion on the bodies) and I want to use ortographic projection (that allows NO distorsion of bodies).

In attachment an example of the two bottons that I am looking for, that already exist in MESH and PARAVIS environment (but as said, I can't find it into the post processor of Aster Study).

Last edited by AlbiBone (2021-09-25 10:35:37)


Attachments:
ButtonsMeshEnv.png, Size: 2.85 KiB, Downloads: 26

Offline

#4 2021-10-01 22:01:53

hberro
Member
From: Palaiseau, France
Registered: 2011-07-05
Posts: 44

Re: How to remove perspective view from post-processor of Aster Study

Unfortunately this is currently not possible using the interface, it is only possible using python.

It is a good idea to add this possibility, we'll add it to the backlog.

Offline