Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2015-01-26 11:48:40

RichardS
Member
From: Munich, Germany
Registered: 2010-09-28
Posts: 550
Website

[SOLVED] Incorrect point coordinates for reference point in SDLV124

Hello,
I just stumbled across a typo in the documentation. For the reference point N433 for this case
it should be (0.1575, 0.125, 0) instead of  (1.575, 1.25, 0)

And just a side note:
it is very inconvenient to provide a damping setting of alpha and beta, which have interchanged meanings in the input file and the documentation of the test case!

Best regards,
Richard

Last edited by RichardS (2015-02-09 11:53:21)


Richard Szoeke-Schuller
Product Management
www.simscale.com
We are hiring! https://simscale-jobs.personio.de/?language=en#all

Offline

#2 2015-01-27 14:05:09

delmas
Administrator
From: EDF R&D
Registered: 2007-12-12
Posts: 837

Re: [SOLVED] Incorrect point coordinates for reference point in SDLV124

I will fix the typo error.

But I don't understand your side note. The meaning is the same.


Code_Aster release : unstable on (Ubuntu Precise Pangolin 12.04 64 bits) - GNU + Intel

Code_Aster. What else ?

Offline

#3 2015-01-27 16:12:14

RichardS
Member
From: Munich, Germany
Registered: 2010-09-28
Posts: 550
Website

Re: [SOLVED] Incorrect point coordinates for reference point in SDLV124

I'm sorry,
I think I mixed it up with another source.

My bad!


Richard Szoeke-Schuller
Product Management
www.simscale.com
We are hiring! https://simscale-jobs.personio.de/?language=en#all

Offline