Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2021-12-17 09:54:22

nirmaljoshi
Member
From: Japan
Registered: 2018-10-12
Posts: 190

Salome meca windows software throws error while running

I want to use windows version of code-aster. I downloaded it and after extracting the zip, I launched it.

It launches well. No problem.

Geometry and Mesh module works well. I created the geometry and mesh. No problem.

I launched Aster module and created command file. No problem.

But when I run the analysis, there is always some error such as

EXECUTION_CODE_ASTER_EXIT_XXXX=0
where XXXX changes every time I try to execute the analysis.

The .comm file is pretty simple and surely it has no error. What is going on? I need help.

Log file is copied below. MED and COMM file is attached, just in case.

I must mention that the windows pc I am trying to run is under LAN and controlled by IT guys of my office.

















Active code page: 65001


--------------------------------------------------------------------------------

Code_Aster execution


<INFO> prepare environment in C:\Users\JOSHI~1.NIR\AppData\Local\Temp\joshi_nirmalraj-PC0133-interactif_5552


--------------------------------------------------------------------------------

Copying datas


copying ...\joshi.nirmalraj-PC0133-Fri-17-173448.778\RunCase_3_Stage_1.comm...

                                                                        copying ...\joshi.nirmalraj-PC0133-Fri-17-173448.778\mesh.med...        <INFO> Parameters : memory 2048 MB - time limit 900 s


--------------------------------------------------------------------------------

Content of C:\Users\JOSHI~1.NIR\AppData\Local\Temp\joshi_nirmalraj-PC0133-interactif_5552 before execution


b''


--------------------------------------------------------------------------------

Code_Aster run


<INFO> Command line 1 :
<INFO> C:\sm-2019-w64-1.2\PRODUCTS\code_aster\14.4\bin\aster C:\sm-2019-w64-1.2\PRODUCTS\code_aster\14.4\lib\aster\Execution\E_SUPERV.py -commandes fort.1 --num_job=5552 --mode=interactif --rep_outils=C:\sm-2019-w64-1.2\PRODUCTS\code_aster\outils --rep_mat=C:\sm-2019-w64-1.2\PRODUCTS\code_aster\14.4\share\aster\materiau --rep_dex=C:\sm-2019-w64-1.2\PRODUCTS\code_aster\14.4\share\aster\datg --numthreads=1 --suivi_batch --tpmax=900.0 --memjeveux=256.0
# ------------------------------------------------------------------------------------------
EXECUTION_CODE_ASTER_EXIT_5552=0
<INFO> Code_Aster run ended, diagnostic : <F>_ABNORMAL_ABORT


--------------------------------------------------------------------------------

Content of C:\Users\JOSHI~1.NIR\AppData\Local\Temp\joshi_nirmalraj-PC0133-interactif_5552 after execution


b''


--------------------------------------------------------------------------------

Size of bases




--------------------------------------------------------------------------------

Copying results




<A>_COPYFILE       no such file or directory: fort.3


copying ...\fort.6...                                                   

<F>_ABNORMAL_ABORT Code_Aster run ended






---------------------------------------------------------------------------------

                                            cpu     system    cpu+sys    elapsed

---------------------------------------------------------------------------------

   Preparation of environment              0.00       0.00       0.00       0.00

   Copying datas                           0.00       0.00       0.00       0.06

   Code_Aster run                          0.00       0.00       0.00       0.75

   Copying results                         0.00       0.00       0.00       0.04

---------------------------------------------------------------------------------

   Total                                   0.00       0.06       0.06       1.21

---------------------------------------------------------------------------------


as_run 2018.1


------------------------------------------------------------

--- DIAGNOSTIC JOB : <F>_ABNORMAL_ABORT

------------------------------------------------------------




EXIT_CODE=4


Attachments:
meshComm.zip, Size: 31.4 KiB, Downloads: 183

Offline

#2 2022-01-11 17:52:05

Romans1988
Member
Registered: 2021-11-08
Posts: 11

Re: Salome meca windows software throws error while running

Hi,
i have run your .comm file and there is no error.
How much memory you have given to the analysis?
Can you attach the .mess file?
Thanks

Offline