Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2016-11-15 06:35:23

GuillermoBarraza
Member
Registered: 2016-05-24
Posts: 49

[SOLVED]help NON CONVERGENCE non-linear geometry (Contact problem)

Hi,

I've been having troubles in a contact problem in the geometry convergence. I play with the time step, contact formulations, etc. but still not converge to the RESI_GEOM value (1e-3). Does someone have any hint on this?

You can find the .mess and MED file attached to this post.

Regards,

Guillermo

Last edited by GuillermoBarraza (2016-11-17 23:27:20)

Offline

#2 2016-11-17 21:38:41

stephaneberger
Member
From: Strasbourg (France)
Registered: 2012-10-15
Posts: 70

Re: [SOLVED]help NON CONVERGENCE non-linear geometry (Contact problem)

No file

Offline

#3 2016-11-17 23:18:03

GuillermoBarraza
Member
Registered: 2016-05-24
Posts: 49

Re: [SOLVED]help NON CONVERGENCE non-linear geometry (Contact problem)

stephaneberger wrote:

No file

Sorry, didn't see that the file was missing. Although, I've found the solution, I just had to change the time step for the Newton's method to converge and switch between the master and slave surfaces. Nevertheless, here are the files in case someone needs it.


Attachments:
meca_ejem_1.tar.gz, Size: 478.25 KiB, Downloads: 257

Offline