Atom topic feed | site map | contact | login | Protection des données personnelles | Powered by FluxBB | réalisation artaban
You are not logged in.
- Topics: Active | Unanswered
#1 2016-06-30 17:11:07
- m_golbs
- Member
- From: Germany
- Registered: 2009-11-09
- Posts: 126
<F>_FILE_NOT_FOUND file not found : /opt/aster12.5/testing/config.txt
Hello,
I have take the Code-Aster 12.5 install, but 12.5 not work. The install process look's like correct. 12.3 run's normal.
+ build the elements catalog elem.1 using installed aster (from cata_ele.ojb)
+ install /opt/aster12.5/12.5/lib/aster/elem.1 (from build/release/elem.1)
'install' finished successfully (9.852s)
EXIT_COMMAND_16978_00000107=0
installing aster to /opt/aster12.5... [ OK ]
leaving directory '/tmp/install_aster.16978/aster-12.5.0'
>>> Installation <<<
entering directory '/tmp/install_aster.16978/aster-12.5.0'
Command line : cp wafcfg/aster_full_config.py /opt/aster12.5/12.5/share/aster
installing aster to /opt/aster12.5...
Command output :
EXIT_COMMAND_16978_00000108=0
installing aster to /opt/aster12.5... [ OK ]
leaving directory '/tmp/install_aster.16978/aster-12.5.0'
>>> Modifying pre-configured files <<<
entering directory '/opt/aster12.5/etc/codeaster'
modifying aster [ OK ]
leaving directory '/opt/aster12.5/etc/codeaster'
>>> Modifying pre-configured files <<<
entering directory '/opt/aster12.5/etc/codeaster'
modifying aster [ OK ]
leaving directory '/opt/aster12.5/etc/codeaster'
>>> Clean temporary objects <<<
entering directory '/tmp/install_aster.16978'
deleting /tmp/install_aster.16978/aster-12.5.0... [ OK ]
deleting /tmp/install_aster.16978...
leaving directory '/tmp/install_aster.16978'
Filling cache... [ OK ]
--------------------------------------------------------------------------------
Installation of aster 12.5.0 successfully completed
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Compiler variables for homard (set as environment variables):
export CC='/usr/bin/gcc'
export CFLAGS='-O2 -fno-stack-protector -fPIC'
export CFLAGS_DBG='-g -fno-stack-protector -fPIC'
export CFLAGS_OPENMP='-fopenmp'
export CXX='/usr/bin/g++'
export CXXLIB='-L/usr/lib/gcc/x86_64-linux-gnu/4.7 -lstdc++'
export DEFINED='LINUX64 _USE_OPENMP'
export F90='/usr/bin/gfortran'
export F90FLAGS='-O2 -fPIC'
export F90FLAGS_DBG='-g -fPIC'
export F90FLAGS_I8=' -fdefault-double-8 -fdefault-integer-8 -fdefault-real-8'
export F90FLAGS_OPENMP=' -fopenmp'
export FFLAGS_I8=' -fdefault-double-8 -fdefault-integer-8 -fdefault-real-8'
export LD='/usr/bin/gfortran'
export LDFLAGS_OPENMP=' -fopenmp'
export MATHLIB='/usr/lib/liblapack.a /usr/lib/libblas.a'
export OTHERLIB='-L/usr/lib/x86_64-linux-gnu -lpthread -L/usr/lib/x86_64-linux-gnu -lz'
# Environment settings :
--------------------------------------------------------------------------------
Checking for dependencies and required variables for 'homard'... [ OK ]
--------------------------------------------------------------------------------
Installation of : homard 11.4
The HOMARD software carries out the adaptation of 2D/3D finite element or
finite volume meshes by refinement and unrefinement techniques.
Archive filename : homard-11.4
Destination : /opt/aster12.5/public/homard-11.4
Working directory : /tmp/install_homard.16978
--------------------------------------------------------------------------------
Filling cache... [ OK ]
Checking permissions... [ OK ]
Product 'homard' is already installed.
Choose 'no' to keep the current installation, 'yes' to force its re-installation (y/n, default no): yes
>>> Extraction <<<
entering directory '/tmp/install_homard.16978'
Extracting homard-11.4-1.tar.gz... [ OK ]
--- 22 files extracted
leaving directory '/tmp/install_homard.16978'
>>> Installation <<<
entering directory '/tmp/install_homard.16978/homard-11.4'
Command line : /usr/bin/python setup_homard.py --prefix=/opt/aster12.5/public/homard-11.4
installing homard to /opt/aster12.5/public/homard-11.4...
Command output :
. Installation de l'excutable HOMARD
. Installation des procdures de couplage Code_Aster-HOMARD
L'installation est russie.
EXIT_COMMAND_16978_00000110=0
installing homard to /opt/aster12.5/public/homard-11.4... [ OK ]
leaving directory '/tmp/install_homard.16978/homard-11.4'
>>> Installation <<<
entering directory '/opt/aster12.5/outils'
Command line : rm -f homard ; ln -sf ../public/homard-11.4/homard .
installing homard to /opt/aster12.5/public/homard-11.4...
Command output :
EXIT_COMMAND_16978_00000111=0
installing homard to /opt/aster12.5/public/homard-11.4... [ OK ]
leaving directory '/opt/aster12.5/outils'
>>> Clean temporary objects <<<
entering directory '/tmp/install_homard.16978'
deleting /tmp/install_homard.16978/homard-11.4... [ OK ]
deleting /tmp/install_homard.16978...
leaving directory '/tmp/install_homard.16978'
Filling cache... [ OK ]
--------------------------------------------------------------------------------
Installation of homard 11.4 successfully completed
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
SUMMARY OF INSTALLATION
--------------------------------------------------------------------------------
Installation of : hdf5 1.8.10
Destination : /opt/aster12.5/public/hdf5-1.8.10
Elapsed time : 95.06 s
[ OK ]
Installation of : med 3.0.8
Destination : /opt/aster12.5/public/med-3.0.8
Elapsed time : 102.16 s
[ OK ]
Installation of : gmsh 2.8.3
Destination : /opt/aster12.5/public/gmsh-2.8.3-Linux
Elapsed time : 3.37 s
[ OK ]
Installation of : gibi 2000
Destination : /opt/aster12.5/public/gibi-2000
Elapsed time : 3.28 s
[ OK ]
Installation of : eficas 2015.2
Destination : /opt/aster12.5/public/eficas-2015.2
Elapsed time : 0.23 s
[ OK ]
Installation of : scotch 5.1.11_esmumps
Destination : /opt/aster12.5/public/scotch-5.1.11_esmumps
Elapsed time : 23.19 s
[ OK ]
Installation of : astk 1.13.7
Destination : /opt/aster12.5/lib/python2.7/site-packages
Elapsed time : 1.37 s
[ OK ]
Installation of : metis 4.0.3
Destination : /opt/aster12.5/public/metis-4.0.3
Elapsed time : 12.50 s
[ OK ]
Installation of : mfront 2.0.3
Destination : /opt/aster12.5/public/mfront-2.0.3
Elapsed time : 47.77 s
[ OK ]
Installation of : mumps 4.10.0
Destination : /opt/aster12.5/public/mumps-4.10.0
Elapsed time : 85.39 s
[ OK ]
Installation of : aster 12.5.0
Destination : /opt/aster12.5
Elapsed time : 163.39 s
[ OK ]
Installation of : homard 11.4
Destination : /opt/aster12.5/public/homard-11.4
Elapsed time : 7.85 s
[ OK ]
Installation of : Code_Aster + 12 of its prerequisites
Destination : /opt/aster12.5
Elapsed time : 561.89 s
[ OK ]
golbsm@debian-7-64-mpi:/opt/aster-full-src-12.5.0$ If I start code-aster run it takes following:
<F>_FILE_NOT_FOUND file not found : /opt/aster12.5/testing/config.txt
---------------------------------------------------------------------------------
cpu system cpu+sys elapsed
---------------------------------------------------------------------------------
Total 0.03 0.01 0.04 0.04
---------------------------------------------------------------------------------
as_run 1.13.7
------------------------------------------------------------
--- DIAGNOSTIC JOB : <F>_FILE_NOT_FOUND
------------------------------------------------------------
EXIT_CODE=4
golbsm@debian-7-64-mpi:~/solve/2016-modell$ The config.txt are under /opt/aster12.5/12.5/share
If I copy my files like config.txt to a new directory /opt/aster12.5/testing/ I have no problem.
I'm not sure if our firewall a problem for waf process. Must waf process have internet conection?
About information I'm very happy.
Thank's Markus
Last edited by m_golbs (2016-06-30 17:18:41)
The superfluous chase, is to miss the essential.
Jules Saliège
Offline
#2 2016-07-03 16:22:00
- Thomas DE SOZA
- Guru
- From: EDF
- Registered: 2007-11-23
- Posts: 3,066
Re: <F>_FILE_NOT_FOUND file not found : /opt/aster12.5/testing/config.txt
Hi,
Without files (setup.log, setup.dbg, output and error of a failed calculation), hard to offer any meaningful answer.
Still, it looks like the newly compiled code_aster version is not correctly configured in ASTK. You may have mixed up versions of ASTK between 12.3 and 12.5. You should erase previous settings ($HOME/.astkrc* directories) and make sure you're using the correct version of ASTK.
If it does not work, you need to edit manually the code_aster version location in /opt/aster12.5/etc/codeaster/aster and make sure the path to the 12.5 (stable) version is /opt/aster12.5/testing/share/aster
TdS
Offline
Board footer