#1 2014-06-24 22:25:19

Humberto

Member

From: Ensenada, Mexico

Registered: 2012-10-15

Posts: 108

Website

Salome Meca 2014 installed on Ubuntu 14.04 not working

I made a really simple mechanic model to test the new Salome-meca and I get this error in my .mess file,  right after printing my .comm file in it.

any ideas?  I am getting very frustrated.

Thaks for the help

----------------------------------------------------------------------------------------------------------------------------------------------------
../../bibc/supervis/astercore_module.c 536 : erreur lors de l'appel a la fonction E_Global.print_header
EXECUTION_CODE_ASTER_EXIT_0001-7019-HPg32=134
----------------------------------------------------------------------------------------------------------------------------------------------------

I just attached the .hdf file and my command.comm file is here and came right out of the wizard. to see if someone can replicate the bug.

https://drive.google.com/file/d/0B3df_K … sp=sharing

---

Attachments:
Study1.hdf, Size: 556.46 KiB, Downloads: 535

Humberto

Member

From: Ensenada, Mexico

Registered: 2012-10-15

Posts: 108

Website

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

Can anybody report if he has it running on Ubuntu 14.04?

Regards

k_zurawski

Member

From: Gdansk

Registered: 2010-03-13

Posts: 275

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

I'll try and inform you.

---

regards,
Krzysztof

Humberto

Member

From: Ensenada, Mexico

Registered: 2012-10-15

Posts: 108

Website

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

thanks k_zurawski!

Jacopo

Member

From: Colle di Val d'Elsa, Italy

Registered: 2008-02-05

Posts: 566

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

Hi Huberto,
I'm running Salome-Meca 2014.1 on Ubuntu 14.1 LTS.
Except Paraview reuslt, but I must understand if it's my mistake or a bug, all run in correct way on my Worksation.

Saluti
Jacopo

---

Salome-Meca 2017.02 (Intel Xeon 8 Core x 2 RAM 32GiB) Ubuntu 16.04 LTS

messelink

Member

Registered: 2011-11-22

Posts: 19

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

I'm using Salome-Meca 2014.1 on Ubuntu 14.04 and it seems to run fine (but I am no expert). Did you install all dependencies?

http://www.code-aster.org/V2/spip.php?article91

Humberto

Member

From: Ensenada, Mexico

Registered: 2012-10-15

Posts: 108

Website

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

I am shure I did since the last version I was running Salome-Meca 6 with no problems at all

I also installed Code_aster and it seems to run fine on the test cases, how do I point Salome-Meca 7 to my actual code aster installation and not the bundled one?

Regards

Thomas DE SOZA

Guru

From: EDF

Registered: 2007-11-23

Posts: 3,066

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

I also installed Code_aster and it seems to run fine on the test cases, how do I point Salome-Meca 7 to my actual code aster installation and not the bundled one?

Edit the following file :

$HOME/.astkrc_salomemeca2014.1/prefs

The name of the directory may vary depending on whether you want to add it to the Aster module of Salome-Meca or to ASTK launched from Salome-Meca.

Then add the standalone version as explained here : https://bitbucket.org/code_aster/codeas … on-in-astk

TdS

Thomas DE SOZA

Guru

From: EDF

Registered: 2007-11-23

Posts: 3,066

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

I made a really simple mechanic model to test the new Salome-meca and I get this error in my .mess file,  right after printing my .comm file in it.

any ideas?  I am getting very frustrated.

Thaks for the help

----------------------------------------------------------------------------------------------------------------------------------------------------
../../bibc/supervis/astercore_module.c 536 : erreur lors de l'appel a la fonction E_Global.print_header
EXECUTION_CODE_ASTER_EXIT_0001-7019-HPg32=134
----------------------------------------------------------------------------------------------------------------------------------------------------

I just attached the .hdf file and my command.comm file is here and came right out of the wizard. to see if someone can replicate the bug.

https://drive.google.com/file/d/0B3df_K … sp=sharing

Regarding the problem above, the solution should be to install two missing dependencies regarding BLAS and Lapack (symlink to libblas.so and liblapack.so). In Ubuntu, this is done with the libblas-dev and liblapack-dev packages.

TdS

k_zurawski

Member

From: Gdansk

Registered: 2010-03-13

Posts: 275

Re: Salome Meca 2014 installed on Ubuntu 14.04 not working

well, sorry, forgot.

It run when I changed job properties - server from 127.0.0.0 to localhost, astk to stable and more memory.

---

regards,
Krzysztof