# Printing Envelope values for Beam analysis

**URL:** <https://code-aster.org/forum/t/printing-envelope-values-for-beam-analysis/12366>\
**Category:** Code\_Aster solver\
**Created:** [November 12, 2026, 11:46pm UTC](https://code-aster.org/forum/t/printing-envelope-values-for-beam-analysis/12366 "2026-11-12T23:46:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Divert](https://code-aster.org/forum/letter_avatar_proxy/v4/letter/d/7ba0ec/32.png) [@Divert](https://code-aster.org/forum/u/Divert)\
**Post date:** [November 12, 2026, 11:46pm UTC](https://code-aster.org/forum/t/printing-envelope-values-for-beam-analysis/12366/1 "2026-11-12T23:46:37Z")

</div>

Hello I am doing a beam analysis with several load cases, I am trying to print the maximum values to design against (an envelope along all my time steps) the following code gives the maximum / minimum values for my internal forces but prints a block per time step.

Is there a way to get Max/Min for all time steps as well. Just the plain maximum / minimum values across all time steps?

**IMPR\_RESU** (  
**FORMAT** =‘RESULTAT’,  
**MODELE** =_model_,  
**RESU** =( **\_F** (  
**CARA\_ELEM** =_elemprop_,  
**FORM\_TABL** =‘OUI’,  
**GROUP\_MA** =(‘VigaPrin’, ),  
**NOM\_CHAM** =(‘SIEF\_NOEU’, ‘DEPL’),  
**NOM\_CMP** =(‘MFY’, ‘VY’, ‘VZ’, ‘DZ’),  
**RESULTAT** =_reslin_,  
**VALE\_MAX** =‘OUI’,  
**VALE\_MIN** =‘OUI’  
), **\_F** (  
**CARA\_ELEM** =_elemprop_,  
**FORM\_TABL** =‘OUI’,  
**GROUP\_MA** =(‘VigasSec’, ),  
**LIST\_INST** =_times_,  
**NOM\_CHAM** =(‘SIEF\_NOEU’, ‘DEPL’),  
**NOM\_CMP** =(‘MFY’, ‘VY’, ‘VZ’, ‘DZ’),  
**RESULTAT** =_reslin_,  
**VALE\_MAX** =‘OUI’,  
**VALE\_MIN** =‘OUI’  
), **\_F** (  
**CARA\_ELEM** =_elemprop_,  
**FORM\_TABL** =‘OUI’,  
**GROUP\_MA** =(‘Columnas’, ),  
**NOM\_CHAM** =(‘SIEF\_NOEU’, ‘DEPL’),  
**NOM\_CMP** =(‘N’, ‘VY’, ‘VZ’, ‘MFY’, ‘MFZ’, ‘DX’, ‘DY’),  
**RESULTAT** =_reslin_,  
**VALE\_MAX** =‘OUI’,  
**VALE\_MIN** =‘OUI’  
), **\_F** (  
**CARA\_ELEM** =_elemprop_,  
**GROUP\_MA** =(‘Viga3’, ),  
**INST** =(1.0, ),  
**NOM\_CHAM** =(‘SIEF\_NOEU’, ‘DEPL’),  
**NOM\_CMP** =(‘VY’, ‘VZ’, ‘MFY’, ‘DZ’),  
**RESULTAT** =_reslin_  
)),  
**UNITE** =8  
)

---

<div class="post-metadata">

**Author:** ![jeanpierreaubry](https://code-aster.org/forum/letter_avatar_proxy/v4/letter/j/cc9497/32.png) [@jeanpierreaubry](https://code-aster.org/forum/u/jeanpierreaubry)\
**Post date:** [November 15, 2026, 4:36pm UTC](https://code-aster.org/forum/t/printing-envelope-values-for-beam-analysis/12366/2 "2026-11-15T16:36:13Z")

</div>

hello

this probably could be done with the use of TABLE, there is an example in my book

* * *

consider reading my books and examples, freely available here  
[https://www.jean-pierre-aubry.ouvaton.org](https://www.jean-pierre-aubry.ouvaton.org)
