Modélisation K ============== Caractéristiques de la modélisation ----------------------------------- Formulation pression éléments 3D 'ACOUSTIQUE' .. image:: images/1000000000000160000000C129E7A5A1156E971A.png :width: 4.478in :height: 1.6354in .. _RefImage_1000000000000160000000C129E7A5A1156E971A.png: .. csv-table:: "Découpage =", "30", "mailles TETRA4 selon l'axe des :math:`x`" "", "4", "mailles TETRA4 selon l'axe des :math:`y`" "", "4", "mailles TETRA4 selon l'axe des :math:`z`" .. csv-table:: "Conditions limites :", "", "", "" "", "VITE_FACE:", "(Group_ma: velo", "Vnor: RI 0.014 0.)" "", "IMPE_FACE:", "(Group_ma: impe", "Impe: RI 445.9 0.)" .. csv-table:: "Nom des nœuds", ":math:`A=\mathrm{No18}`", ":math:`B=\mathrm{No521}`", ":math:`C=\mathrm{No15}`", ":math:`D=\mathrm{No1028}`" Caractéristiques du maillage ---------------------------- .. csv-table:: "Nombre de nœuds :", "685" "Nombre de mailles et types :", "2180 TETRA4 64 TRIA6" Valeurs testées --------------- .. csv-table:: "**Localisation**", "**Grandeurs**", "**Référence**", "**tolérance**" ":math:`A`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(–6.2426,0.0000) 0.0437", "1% 3%" ":math:`B`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(–6.2426,0.0000) 0.0437", "2% 3%" ":math:`C`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(6.0237,1.6387) 0.0437", "5% 3%" ":math:`D`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(6.0237,1.6387) 0.0437", "5% 3%" .. csv-table:: "", "", "", "", "**Fréquence**", "" "**Ordre du mode propre** :math:`i`", ":math:`m`", ":math:`n`", ":math:`p`", "**Référence**", "**tolérance**" "2 3 4 5 6 7 8 9", "1 2 3 4 5 0 1 2", "0 0 0 0 0 0 0 0", "0 0 0 0 0 1 1 1", "171.5 343.0 514.5 686.0 857.5 857.5 874.482 923.556", "0.2% 0.3% 0.6% 1% 2% 3% 3% 4%"