Modélisation H ============== Caractéristiques de la modélisation ----------------------------------- Formulation pression éléments 3D 'ACOUSTIQUE' .. image:: images/1000000000000171000000B30C04ACE638637681.png :width: 5.1618in :height: 1.6654in .. _RefImage_1000000000000171000000B30C04ACE638637681.png: .. csv-table:: "Découpage =", "15", "mailles PENTA15selon l'axe des :math:`x`" "", "2", "mailles PENTA15selon l'axe des :math:`y`" "", "2", "mailles PENTA15selon l'axe des :math:`z`" .. csv-table:: "Conditions limites :", "", "", "" "", "VITE_FACE:", "(Group_ma: velo", "Vnor: RI 0.014 0.)" "", "IMPE_FACE:", "(Group_ma: impe", "Impe: RI 445.9 0.)" .. csv-table:: "Nom des nœuds", ":math:`A=\mathrm{No28}`", ":math:`B=\mathrm{No64}`", ":math:`C=\mathrm{No24}`", ":math:`D=\mathrm{No720}`" Caractéristiques du maillage ---------------------------- .. csv-table:: "Nombre de nœuds :", "456" "Nombre de mailles et types :", "90 PENTA1512 TRIA6" Valeurs testées --------------- .. csv-table:: "**Localisation**", "**Grandeurs**", "**Référence**", "**tolérance**" ":math:`A`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(–6.2426,0.0000) 0.0437", "0.1% 3%" ":math:`B`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(–6.2426,0.0000) 0.0437", "0.1% 3%" ":math:`C`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(6.0237,1.6387) 0.0437", "0.1% 3%" ":math:`D`", ":math:`p(\mathrm{réel},\mathrm{imag})` Intensité_Acou", "(6.0237,1.6387) 0.0437", "0.1% 3%" .. csv-table:: "", "", "", "", "**Fréquence**", "" "**Ordre du mode propre** :math:`i`", ":math:`m`", ":math:`n`", ":math:`p`", "**Référence**", "**tolérance**" "2 3 4 5 6 7 8 9", "1 2 3 4 5 0 1 2", "0 0 0 0 0 0 0 0", "0 0 0 0 0 1 1 1", "171.5 343.0 514.5 686.0 857.5 857.5 874.482 923.556", "0.01% 0.01% 0.1% 0.1% 0.1% 0.5% 0.5% 0.5%"