Modélisation A
==============


Caractéristiques de la modélisation
-----------------------------------

Un point matériel de comportement DD_CFC, comportant 12 systèmes de glissement (famille OCTAEDRIQUE) est sollicité à contrainte imposée.


Grandeurs testées et résultats
------------------------------


Valeurs testées
~~~~~~~~~~~~~~~

**Intégration** RUNGE_KUTTA


.. csv-table::

    "**Variable**", "**Instants** :math:`(s)`", "**Référence**", "**Tolérance%**"
    ":math:`{\rho}_{9}`", "1", "7.17E-09", "0,1"
    ":math:`{\rho}_{1}`", "1", "6.608E-09", "0,1"
    ":math:`{\gamma}_{9}`", "1", "8.00E-05", "0,1"
    ":math:`{\gamma}_{1}`", "1", "1.72E-05", "0,2"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "-3.97E-05", "0,1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "3.97E-05", "0,1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "1.81E-05", "0,1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "2.81E-05", "0,1"


**Intégration** IMPLICITE


.. csv-table::

    "**Variable**", "**Instants** :math:`(s)`", "**Référence**", "**Tolérance%**"
    ":math:`{\rho}_{9}`", "1", "7.17E-09", "0,5"
    ":math:`{\rho}_{1}`", "1", "6.608E-09", "0,1"
    ":math:`{\gamma}_{9}`", "1", "8.00E-05", "1"
    ":math:`{\gamma}_{1}`", "1", "1.72E-05", "2"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "-3.97E-05", "1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "3.97E-05", "1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "1.81E-05", "1"
    ":math:`{\varepsilon}_{xx}^{\mathrm{vp}}`", "1", "2.81E-05", "1"