Modélisation L
==============


Caractéristiques de la modélisation
-----------------------------------

Le comportement testé est HAYHURST, en 3D.Pour ce comportement, la seule méthode d'intégration disponible actuellement est RUNGE_KUTTA. On ne teste donc pas de matrice tangente.


Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Type de référence**", "**Référence**", "**Tolérance**"
    "ER_V7_Pa_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_Th_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_sym_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_rot_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_N10", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_N30", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_V7_N60", "ANALYTIQUE", "0.0", "1.0E-10"
    "ER_VMIS_Pa_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_Th_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_sym_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_rot_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_N10", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_N30", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_VMIS_N60", "ANALYTIQUE", "0.0", "1.0E-10"
    "ER_TRACE_Pa_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_Th_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_sym_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_rot_1", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_N10", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_N30", "ANALYTIQUE", "0.0", "1.0E-5"
    "ER_TRACE_N60", "ANALYTIQUE", "0.0", "1.0E-10"
    "", "", "", ""