Modélisation B ============== Caractéristiques de la modélisation ----------------------------------- On utilise une modélisation volumique 3D pour le béton et un modèle grille_membrane pour les armatures dont les mailles supports sont des quadrangles à quatre nœuds. Caractéristiques du maillage ---------------------------- .. image:: images/10000200000001AE000001551801E69DA3424E9C.png :width: 3.0063in :height: 2.5634in .. _RefImage_10000200000001AE000001551801E69DA3424E9C.png: Nombre de nœuds: 8 Nombre de mailles: • 1 maille hexa8 pour le béton • 1 maille quad4 pour les nappes d'armatures (N05-N02-N03-N08) Deux modèles grille_membrane sont définis pour les armatures (une suivant la direction :math:`X` , une suivant la direction :math:`Y` ) Grandeurs testées et résultats ------------------------------ .. csv-table:: "**Instant**", "**Champ**", "**Composante**", "**Lieu**", "**Référence**", "**Tolérance**" "1", "DEPL", "DZ", "nœud: :math:`\mathit{NO5}`", "-7.06E-01", "0.10%" "1", "DEPL", "DZ", "nœud: :math:`\mathit{NO6}`", "-4.81E-01", "0.10%" "1", "FORC_NODA", "DX", "nœud: :math:`\mathit{NO1}`", "-6.35E+09", "0.10%" "1", "FORC_NODA", "DY", "nœud: :math:`\mathit{NO1}`", "-6.07E+09", "0.10%" "1", "FORC_NODA", "DZ", "nœud: :math:`\mathit{NO1}`", "5.72E+08", "0.10%" "1", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{BMA1}` , point:1", "2.00E+11", "0.10%" "1", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA1}` , point:1", "2.94E+10", "0.10%" "1", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA3}` , point:1", "2.41E+10", "0.10%" "1", "SIEF_ELGA", "SIYY", "maille: :math:`\mathit{MA3}` , point:1", "2.41E+10", "0.10%" "1", "SIEF_ELGA", "SIZZ", "maille: :math:`\mathit{MA3}` , point:1", "-3.52E+09", "0.10%" "1", "SIEF_ELGA", "SIXZ", "maille: :math:`\mathit{MA3}` , point:1", "3.96E+08", "0.10%" .. csv-table:: "**Instant**", "**Champ**", "**Composante**", "**Lieu**", "**Référence**", "**Tolérance**" "2", "DEPL", "DZ", "nœud: :math:`\mathit{NO5}`", "-1.41E+00", "0.10%" "2", "DEPL", "DZ", "nœud: :math:`\mathit{NO6}`", "-9.63E-01", "0.10%" "2", "FORC_NODA", "DX", "nœud: :math:`\mathit{NO1}`", "-1.27E+10", "0.10%" "2", "FORC_NODA", "DY", "nœud: :math:`\mathit{NO1}`", "-1.21E+10", "0.10%" "2", "FORC_NODA", "DZ", "nœud: :math:`\mathit{NO1}`", "1.14E+09", "0.10%" "2", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{BMA1}` , point:1", "2.20E+11", "0.10%" "2", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA1}` , point:1", "5.88E+10", "0.10%" "2", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA3}` , point:1", "4.82E+10", "0.10%" "2", "SIEF_ELGA", "SIYY", "maille: :math:`\mathit{MA3}` , point:1", "4.82E+10", "0.10%" "2", "SIEF_ELGA", "SIZZ", "maille: :math:`\mathit{MA3}` , point:1", "-7.04E+09", "0.10%" "2", "SIEF_ELGA", "SIXZ", "maille: :math:`\mathit{MA3}` , point:1", "7.91E+08", "0.10%" "2", "VARI_ELGA", "V1", "maille: :math:`\mathit{BMA1}` , point:1", "9.00E-01", "0.10%" .. csv-table:: "**Instant**", "**Champ**", "**Composante**", "**Lieu**", "**Référence**", "**Tolérance**" "10", "DEPL", "DZ", "nœud: :math:`\mathit{NO5}`", "-6.50E+00", "0.10%" "10", "DEPL", "DZ", "nœud: :math:`\mathit{NO6}`", "-4.86E+00", "0.10%" "10", "FORC_NODA", "DX", "nœud: :math:`\mathit{NO1}`", "-6.33E+10", "0.10%" "10", "FORC_NODA", "DY", "nœud: :math:`\mathit{NO1}`", "-6.12E+10", "0.10%" "10", "FORC_NODA", "DZ", "nœud: :math:`\mathit{NO1}`", "4.18E+09", "0.10%" "10", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{BMA1}` , point:1", "3.80E+11", "0.10%" "10", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA1}` , point:1", "2.15E+11", "0.10%" "10", "SIEF_ELGA", "SIXX", "maille: :math:`\mathit{MA3}` , point:1", "2.44E+11", "0.10%" "10", "SIEF_ELGA", "SIYY", "maille: :math:`\mathit{MA3}` , point:1", "2.44E+11", "0.10%" "10", "SIEF_ELGA", "SIZZ", "maille: :math:`\mathit{MA3}` , point:1", "-2.57E+10", "0.10%" "10", "SIEF_ELGA", "SIXZ", "maille: :math:`\mathit{MA3}` , point:1", "2.89E+09", "0.10%" "10", "VARI_ELGA", "V1", "maille: :math:`\mathit{BMA1}` , point:1", "8.10E+00", "0.10%" "10", "VARI_ELGA", "V1", "maille: :math:`\mathit{MA1}` , point:1", "6.73E-01", "0.10%"