Modélisation A
==============


Caractéristiques de la modélisation
-----------------------------------

Le cylindre étant supposé infini, on ne maille qu’une tranche de hauteur :math:`H=40\mathrm{mm}` avec 2 couches d’éléments.


.. image:: images/10000000000002860000014432D8A565A7516FB7.png
    :width: 6.3374in
    :height: 3.1689in


.. _RefImage_10000000000002860000014432D8A565A7516FB7.png:


Caractéristiques du maillage
----------------------------

Nombre de nœuds : 12

Nombre de mailles et types : 3 QUAD4, 6 TRIA3


Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Type de référence**", "**Valeur de référence**", "**Précision** (%)"
    "M1 (r = 443.33)", "", "", ""
    "t = 12.", "'AUTRE_ASTER'", "288.64", "0,5"
    "t = 100.", "'AUTRE_ASTER'", "202.76", "0,1"
    "t = 600.", "'AUTRE_ASTER'", "93.027", "0,1"
    "t = 2000.", "'AUTRE_ASTER'", "29.419", "0,1"
    "", "", "", ""
    "M2 (r = 469.67)", "", "", ""
    "t = 12.", "'AUTRE_ASTER'", "289.00", "0,1"
    "t = 100.", "'AUTRE_ASTER'", "275.04", "0,5"
    "t = 600.", "'AUTRE_ASTER'", "143.00", "0,1"
    "t = 2000.", "'AUTRE_ASTER'", "35.858", "0,5"
    "", "", "", ""
    "M’1 (r = 443.33)", "", "", ""
    "t = 12.", "'AUTRE_ASTER'", "288.64", "0,5"
    "t = 100.", "'AUTRE_ASTER'", "202.76", "0,1"
    "t = 600.", "'AUTRE_ASTER'", "93.027", "0,1"
    "t = 2000.", "'AUTRE_ASTER'", "29.419", "0,1"
    "", "", "", ""
    "M’2 (r = 469.67)", "", "", ""
    "t = 12.", "'AUTRE_ASTER'", "289.00", "0,1"
    "t = 100.", "'AUTRE_ASTER'", "275.04", "0,5"
    "t = 600.", "'AUTRE_ASTER'", "143.00", "0,1"
    "t = 2000.", "'AUTRE_ASTER'", "35.858", "0,5"