Modélisation B
==============


Caractéristiques de la modélisation
-----------------------------------

**TRIA6, QUAD9**

Par raison de symétrie, on ne maille qu’une moitié de l’épaisseur du mur. La modélisation est faite sur une hauteur :math:`H=0.1m` avec 2 couches d’éléments.


.. image:: images/10000D2200002FDA00001815202BC50F6DCFD53E.svg
    :width: 645
    :height: 322


.. _RefImage_10000D2200002FDA00001815202BC50F6DCFD53E.svg:


Caractéristiques du maillage
----------------------------

Nombre de nœuds : 55

Nombre de mailles et types : 5 QUAD9, 10 TRIA6


Valeurs testées
---------------


.. csv-table::

    "**Identification**", "**Référence**", "**Aster**", "**% différence**"
    ":math:`\mathrm{M1}(x=0.02)\mathrm{N18}`", "", "", ""
    ":math:`t=0.1`", "100.00", "100.00", "+0.00"
    ":math:`t=0.5`", "99.408", "99.278", "–0.13"
    ":math:`t=2.0`", "79.859", "79.898", "+0.05"
    ":math:`t=10.0`", "15.717", "16.043", "+2.07"
    "", "", "", ""
    ":math:`\mathrm{M2}(x=0.08)\mathrm{N49}`", "", "", ""
    ":math:`t=0.1`", "93.666", "94.077", "+0.44"
    ":math:`t=0.5`", "63.500", "63.979", "+0.75"
    ":math:`t=2.0`", "35.717", "35.825", "+0.30"
    ":math:`t=10.0`", "6.7948", "6.9321", "+2.02"
    "", "", "", ""
    ":math:`M’1(x=0.02)\mathrm{N12}`", "", "", ""
    ":math:`t=0.1`", "100.00", "100.00", "+0.00"
    ":math:`t=0.5`", "99.408", "99.311", "–0.10"
    ":math:`t=2.0`", "79.859", "80.101", "+0.30"
    ":math:`t=10.0`", "15.717", "16.093", "+2.39"
    "", "", "", ""
    ":math:`M’2(x=0.08)\mathrm{N30}`", "", "", ""
    ":math:`t=0.1`", "93.666", "93.469", "–0.21"
    ":math:`t=0.5`", "63.500", "62.860", "–1.01"
    ":math:`t=2.0`", "35.717", "35.641", "–0.21"
    ":math:`t=10.0`", "6.7948", "6.9068", "+1.65"