Modélisation B
==============


Caractéristiques de la modélisation
-----------------------------------

**AXIS (TRIA3)**


.. image:: images/1000000000000220000000AE32ACEBB12F9690F6.png
    :width: 5.5374in
    :height: 1.8709in


.. _RefImage_1000000000000220000000AE32ACEBB12F9690F6.png:


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds :", "604"
    "Nombre de mailles et types :", "900 TRIA3 (et 150 SEG2)"



Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Référence**", "**tolérance**"
    "Température (:math:`°C` )", "", ""
    "", "", ""
    ":math:`z=0.0` :math:`r=.0` (:math:`\mathit{n1}`  : :math:`A` )", "0.0000", ".00001"
    ":math:`r=.01` (:math:`\mathit{n4}` : :math:`D` )", "0.0000", ".00001"
    ":math:`z=0.1` :math:`r=.0` (:math:`\mathit{n61}` )", "0.3694", "1%"
    ":math:`r=.01` (:math:`\mathit{n64}` )", "0.3694", "1%"
    ":math:`z=0.2` :math:`r=.0` (:math:`\mathit{n121}` )", "0.9718", "1%"
    ":math:`r=.01` (:math:`\mathit{n124}` )", "0.9718", "1%"
    ":math:`z=0.3` :math:`r=.0` (:math:`\mathit{n181}` )", "2.1870", "1%"
    ":math:`r=.01` (:math:`\mathit{n184}` )", "2.1870", "1%"
    ":math:`z=0.4` :math:`r=.0` (:math:`\mathit{n241}` )", "4.7815", "1%"
    ":math:`r=.01` (:math:`\mathit{n244}` )", "4.7815", "1%"
    ":math:`z=0.5` :math:`r=.0` (:math:`\mathit{n301}` )", "10.392", "1%"
    ":math:`r=.01` (:math:`\mathit{n304}` )", "10.392", "1%"
    ":math:`z=0.6` :math:`r=.0` (:math:`\mathit{n361}` )", "22.555", "1%"
    ":math:`r=.01` (:math:`\mathit{n364}` )", "22.555", "1%"
    ":math:`z=0.7` :math:`r=.0` (:math:`\mathit{n421}` )", "48.944", "1%"
    ":math:`r=.01` (:math:`\mathit{n424}` )", "48.944", "1%"
    ":math:`z=0.8` :math:`r=.0` (:math:`\mathit{n481}` )", "106.20", "1%"
    ":math:`r=.01` (:math:`\mathit{n484}` )", "106.20", "1%"
    ":math:`z=0.9` :math:`r=.0` (:math:`\mathit{n541}` )", "230.44", "1%"
    ":math:`r=.01` (:math:`\mathit{n544}` )", "230.44", "1%"
    ":math:`z=1.0` :math:`r=.0` (:math:`\mathit{n601}` : :math:`B` )", "500.00", ".00001"
    ":math:`r=.01` (:math:`\mathit{n604}` : :math:`C` )", "500.00", ".00001"


(* : Température imposée)


Remarques
---------

La chaleur volumique :math:`\rho {C}_{P}` n'intervient pas dans ce test, mais doit être déclarée pour le *Code_Aster* . On prend :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C` .