Modélisation A
==============


Caractéristiques de la modélisation
-----------------------------------

**3D (PENTA6, HEXA8)**


.. image:: images/1000000000000230000000E6667ACC18E40B1A7A.png
    :width: 5.5398in
    :height: 2.4102in


.. _RefImage_1000000000000230000000E6667ACC18E40B1A7A.png:


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds :", "1313"
    "Nombre de mailles et types :", "300 PENTA6, 600 HEXA8 (et 300 QUAD4)"



Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Référence**", "**tolérance**"
    "Température (:math:`°C` )", "", ""
    "", "", ""
    ":math:`z=0.0` :math:`r=.0` (:math:`\mathit{n1}` : :math:`A` )", "0.0000", ".00001"
    ":math:`r=.01` (:math:`\mathit{n13}` : :math:`D` )", "0.0000", ".00001"
    ":math:`z=0.1` :math:`r=.0` (:math:`\mathit{n131}` )", "0.3694", "1%"
    ":math:`r=.01` (:math:`\mathit{n143}` )", "0.3694", "1%"
    ":math:`z=0.2` :math:`r=.0` (:math:`\mathit{n261}` )", "0.9718", "1%"
    ":math:`r=.01` (:math:`\mathit{n273}` )", "0.9718", "1%"
    ":math:`z=0.3` :math:`r=.0` (:math:`\mathit{n391}` )", "2.1870", "1%"
    ":math:`r=.01` (:math:`\mathit{n403}` )", "2.1870", "1%"
    ":math:`z=0.4` :math:`r=.0` (:math:`\mathit{n521}` )", "4.7815", "1%"
    ":math:`r=.01` (:math:`\mathit{n533}` )", "4.7815", "1%"
    ":math:`z=0.5` :math:`r=.0` (:math:`\mathit{n651}` )", "10.392", "1%"
    ":math:`r=.01` (:math:`\mathit{n663}` )", "10.392", "1%"
    ":math:`z=0.6` :math:`r=.0` (:math:`\mathit{n781}` )", "22.555", "1%"
    ":math:`r=.01` (:math:`\mathit{n793}` )", "22.555", "1%"
    ":math:`z=0.7` :math:`r=.0` (:math:`\mathit{n911}` )", "48.944", "1%"
    ":math:`r=.01` (:math:`\mathit{n923}` )", "48.944", "1%"
    ":math:`z=0.8` :math:`r=.0` (:math:`\mathit{n1041}` )", "106.20", "1%"
    ":math:`r=.01` (:math:`\mathit{n1053}` )", "106.20", "1%"
    ":math:`z=0.9` :math:`r=.0` (:math:`\mathit{n1171}` )", "230.44", "1%"
    ":math:`r=.01` (:math:`\mathit{n1183}` )", "230.44", "1%"
    ":math:`z=1.0` :math:`r=.0` (:math:`\mathit{n1301}` :B)", "500.00", ".00001"
    ":math:`r=.01` (:math:`\mathit{n1313}` :C)", "500.00", ".00001"


(* : Température imposée)


Remarques
---------

La chaleur volumique :math:`\rho {C}_{P}` n'intervient pas dans ce test, mais doit être déclarée pour *Code_Aster* . On prend :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C` .

La condition limite :math:`\varphi =0.` est implicite sur les bords libres.