Modélisation B
==============


Caractéristiques de la modélisation
-----------------------------------

**AXIS (TRIA6)**


.. image:: images/100000000000021C000000BF9590DB69CA285EF8.png
    :width: 5.7575in
    :height: 2.0063in


.. _RefImage_100000000000021C000000BF9590DB69CA285EF8.png:


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds :", "805"
    "Nombre de mailles et types :", "320 TRIA6 (et 80 SEG3)"



Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Référence**", "**tolérance**"
    "Température (°C)", "", ""
    "", "", ""
    "z = 0.0 r = .0 (n1 :A)", "0.00", "00001"
    "r = .01 (n5 :D)", "0.00", "00001"
    "z = 0.1 r = .0 (n81)", " 4.00", "1%"
    "r = .01 (n85)", " 4.00", "1%"
    "z = 0.2 r = .0 (n161)", "4.00", "1%"
    "r = .01 (n165)", "4.00", "1%"
    "z = 0.3 r = .0 (n241)", "24.00", "1%"
    "r = .01 (n245)", "24.00", "1%"
    "z = 0.4 r = .0 (n321)", "56.00", "1%"
    "r = .01 (n325)", "56.00", "1%"
    "z = 0.5 r = .0 (n401)", "100.00", "1%"
    "r = .01 (n405)", "100.00", "1%"
    "z = 0.6 r = .0 (n481)", "156.00", "1%"
    "r = .01 (n485)", "156.00", "1%"
    "z = 0.7 r = .0 (n561)", "224.00", "1%"
    "r = .01 (n565)", "224.00", "1%"
    "z = 0.8 r = .0 (n641)", "304.00", "1%"
    "r = .01 (n645)", "304.00", "1%"
    "z = 0.9 r = .0 (n721)", "396.00", "1%"
    "r = .01 (n725)", "396.00", "1%"
    "z = 1.0 r = .0 (n801:B)", "500.00", "00001"
    "r = .01 (n805:C)", "500.00", "00001"


(* : Température imposée)


Remarques
---------

La chaleur volumique :math:`\rho {C}_{P}` n'intervient pas dans ce test, mais doit être déclarée pour le *Code_Aster* . On prend :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C` .

La condition limite :math:`\varphi =0.` est implicite sur les bords libres.