Modélisation A
==============


Caractéristiques de la modélisation
-----------------------------------

**3D (PENTA15, HEXA20)**


.. image:: images/100000000000023C000000EC017ACAB6D0B934A3.png
    :width: 5.8118in
    :height: 2.7126in


.. _RefImage_100000000000023C000000EC017ACAB6D0B934A3.png:


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds :", "1937"
    "Nombre de mailles et types :", "160 PENTA15, 160 HEXA20 (et 160 QUAD8)"



Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Référence**", "**tolérance**"
    "Température (°C)", "", ""
    "", "", ""
    "z = 0.0 r = .0 (n1 :A)", "0.00", ".00001"
    "r = .01 (n17 :D)", "0.00", ".00001"
    "z = 0.1 r = .0 (n193)", " 4.00", "1%"
    "r = .01 (n209)", " 4.00", "1%"
    "z = 0.2 r = .0 (n385)", "4.00", "1%"
    "r = .01 (n401)", "4.00", "1%"
    "z = 0.3 r = .0 (n577)", "24.00", "1%"
    "r = .01 (n593)", "24.00", "1%"
    "z = 0.4 r = .0 (n769)", "56.00", "1%"
    "r = .01 (n785)", "56.00", "1%"
    "z = 0.5 r = .0 (n961)", "100.00", "1%"
    "r = .01 (n977)", "100.00", "1%"
    "z = 0.6 r = .0 (n1153)", "156.00", "1%"
    "r = .01 (n1169)", "156.00", "1%"
    "z = 0.7 r = .0 (n1345)", "224.00", "1%"
    "r = .01 (n1361)", "224.00", "1%"
    "z = 0.8 r = .0 (n1537)", "304.00", "1%"
    "r = .01 (n1553)", "304.00", "1%"
    "z = 0.9 r = .0 (n1729)", "396.00", "1%"
    "r = .01 (n1745)", "396.00", "1%"
    "z = 1.0 r = .0 (n1921:B)", "500.00", ".00001"
    "r = .01 (n1937:C)", "500.00", ".00001"


(* : Température imposée)


Remarques
---------

La chaleur volumique :math:`\rho {C}_{P}` n'intervient pas dans ce test, mais doit être déclarée pour *Code_Aster* . On prend :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C` .

La condition limite :math:`\varphi =0.` est implicite sur les bords libres.