Modélisation A
==============


Caractéristiques de la modélisation
-----------------------------------

**AXIS (QUAD9)**


.. image:: images/10000000000001E800000134A1497ADA1D8124E7.png
    :width: 4.7244in
    :height: 2.8508in


.. _RefImage_10000000000001E800000134A1497ADA1D8124E7.png:


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds :", "123"
    "Nombre de mailles et types :", "20 QUAD9"



Remarques
---------

La chaleur volumique :math:`\rho {C}_{P}` n'intervient pas dans ce test, mais doit obligatoirement être déclarée. On prend :math:`\rho {C}_{P}=2.0J/{m}^{3}°C`

La condition limite :math:`\varphi =0`  est implicite sur les bords libres.


Grandeurs testées et résultats
------------------------------


.. csv-table::

    "**Identification**", "**Référence**", "**Code_Aster**", "**% différence**", "**tolérance**"
    "Température (°C)", "", "", "", ""
    "", "", "", "", ""
    "Nœud n1 (A : r = 1.0)", "20.00", "20.0000", "0.000%*", "1%"
    "Nœud n25 (E : r = 1.2)", "28.73", "28.7276", "0.008%", "1%"
    "Nœud n61 (F : r = 1.5)", "32.62", "32.6222", "0.007%", "1%"
    "", "", "", "", ""
    "Densité de flux (:math:`W/{m}^{2}` )", "", "", "", ""
    "", "", "", "", ""
    "Maille m20 n1 (r = 1.0)", "-58.20", "-58.1592", "-0.070%", "1%"
    "Maille m17 n25 (r = 1.2)", "-30.17", "-30.1412", "-0.095%", "1%"
    "Maille m16 n25 (r = 1.2)", "-30.17", "-30.1434", "-0.088%", "1%"
    "Maille m11 n61 (r = 1.5)", "2.87", "2.8791", "0.316%", "1%"
    "Maille m10 n61 (r = 1.5)", "2.87", "2.8782", "0.285%", "1%"