Modélisation K ============== Caractéristiques de la modélisation ----------------------------------- Plaque multicouche isotrope (5 couches dans l’épaisseur). Élément de coque triangulaire DST. Le repère utilisateur est confondu avec le repère d’orthotropie. .. image:: images/10000000000001E6000001988A1B6B37D25F7D1A.png :width: 5.0634in :height: 4.2492in .. _RefImage_10000000000001E6000001988A1B6B37D25F7D1A.png: Conditions aux limites: .. csv-table:: "DDL_IMPO" "(GROUP_NO: AB, DX: 0.,DZ: 0.,DRY:0.)" "(GROUP_NO: BC, DY: 0.,DZ: 0.,DRX:0.)" "(GROUP_NO: CD, DX: 0.,DZ: 0.,DRY:0.)" "(GROUP_NO: DA, DY: 0.,DZ: 0.,DRX:0.)" "(GROUP_NO: O , DX: 0.,DY: 0.,DRX:0.,DRY:0.,DRZ:0.)" "FORCE_ARETE" "(GROUP_NO: AB MY:0.)" "(GROUP_NO: BC MX:0.)" "(GROUP_NO: CD MY:0.)" "(GROUP_NO: DA MX:0.)" Caractéristiques du maillage ---------------------------- Nombre de nœuds : 170 Nombre de mailles et type : 288 TRIA3 Grandeurs testées et résultats ------------------------------ .. csv-table:: "", "**Identification**" "**Point** :math:`O` :math:`\mathit{M134}`", "" "**Couche 1**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet inférieur" "**Couche 3**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet milieu" "**Couche 5**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet supérieur" "Déplacement", ":math:`\mathit{DZ}`" "**Point** :math:`\mathit{B1}` :math:`\mathit{M122}`", "" "**Couche 1**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet inférieur" "**Couche 3**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet milieu" "**Couche 5**", ":math:`{\sigma}_{xx}` , :math:`{\sigma}_{yy}` , :math:`{\sigma}_{xy}` , :math:`{\sigma}_{xz}` , :math:`{\sigma}_{yz}` sur feuillet supérieur"