Modélisation A ============== Caractéristiques de la modélisation ----------------------------------- Section cornière: .. figure:: images/corniere_geometrie.png :width: 50% :align: center Les coordonnées des points sont: .. csv-table:: :align: center :width: 60% ":math:`P1`", "0.0", "0.0" ":math:`P2`", "1.3E-02", "0.0" ":math:`P3`", "4.75E-02", "0.0" ":math:`P4`", "5.0E-02", "0.0E+00" ":math:`P5`", "5.0E-02", "5.5E-03" ":math:`P6`", "4.750E-02", "8.0E-03" ":math:`P7`", "1.30E-02", "8.0E-03" ":math:`P10`", "8.0E-03", "1.300E-02" ":math:`P11`", "8.0E-03", "4.75E-02" ":math:`P12`", "5.5E-03", "5.0E-02" ":math:`P13`", "0.", "5.0E-02" Caractéristiques du maillage ---------------------------- 182 mailles TRIA6. .. figure:: images/corniere_maillage.png :width: 50% :align: center Solution de référence --------------------- Pas de solution analytique exacte. Les valeurs sont des valeurs de non régression. Grandeurs testées et résultats ------------------------------ .. csv-table:: "**Identification**", "**Référence**", "**Tolérance**" ":math:`A`", "7.39E-04", "1.00E-03" ":math:`ALPHA`", "1.35E+02", "1.00E-03" ":math:`{CDG}_{Y}`", "1.53E-02", "1.50E-03" ":math:`{CDG}_{Z}`", "1.53E-02", "1.50E-03" ":math:`JX`", "1.43E-08", "1.20E-01" ":math:`EY`", "0.00E+00", "1.00E-03" ":math:`EZ`", "-1.60E-02", "1.00E-03" ":math:`{IY}_{G}`", "1.64E-07", "4.00E-03" ":math:`{IYR2}_{P}`", "1.41E-08", "1.40E-02" ":math:`{IYZ}_{G}`", "-9.50E-08", "1.00E-03" ":math:`{IZ}_{G}`", "1.64E-07", "4.00E-03" ":math:`IY`", "6.95E-08", "4.00E-03" ":math:`{IZR2}_{P}`", "1.41E-08", "1.40E-02" ":math:`IZ`", "2.60E-07", "4.00E-03" ":math:`PCTY`", "-4.00E-03", "1.00E-03" ":math:`PCTZ`", "-4.00E-03", "1.00E-02" ":math:`{R}_{MAX}`", "3.79E-02", "1.00E-03" ":math:`{Y}_{MAX}`", "3.54E-02", "1.00E-03" ":math:`{Y}_{MIN}`", "-3.54E-02", "1.00E-03" ":math:`{Z}_{MAX}`", "2.17E-002", "1.00E-03" ":math:`{Z}_{MIN}`", "-1.83E-02", "1.00E-03"