Modélisation A
==============

Caractéristiques de la modélisation
-----------------------------------

Éléments POU_D_T.


Caractéristiques du maillage
----------------------------


.. csv-table::

    "Nombre de nœuds", "Nombre d'éléments"
    "6", "5"


Tableau 2.2-1


Grandeurs testées et résultats
------------------------------


.. csv-table::

    "Point", "Grandeur et unité", "Valeur AFNOR", "Valeur Pipestress", "Valeur Aster", "Écart Aster-AFNOR
    (%)"
    "10", "v-flèche (mm)", "-125", "-125", "-127", "1.962142"
    "20", "v-flèche (mm)", "-125", "-125", "-127", "1.962142"
    "5", "V-réaction (N)", "500", "500", "520", "3.923998"
    "5", "M-moment (N.m)", "500", "500", "513", "2.616038"
    "30", "V-réaction (N)", "500", "500", "520", "3.923998"
    "30", "M-moment (N.m)", "500", "500", "513", "2.616038"


Tableau 2.3-1


Déplacement
-----------


.. image:: images/10000201000003A3000001B3C20B8C8F6DA882AD.png
    :width: 6.298in
    :height: 2.9425in


.. _RefImage_10000201000003A3000001B3C20B8C8F6DA882AD.png:

**Figure** 2.4-1