Warning : The translation process used on this website is a "Machine Translation". It may be imprecise and inaccurate in whole or in part and is provided as a convenience.

Utilisation - U - 367 documents
[U0.00.01] User's guide to the documentation
[U1.02.00] Introduction to Code_Aster
[U1.03.00] The main principles of operation of Code_Aster
[U1.03.01] Supervisor and command language
[U1.03.02] Python methods for access to the Aster objects
[U1.03.03] Performance indicators of a calculation (time / memory)
[U1.04.00] Interface d’accès à Code_Aster : astk
[U1.05.00] A simple example of use
[U2.00.01] Guide de lecture des documentations méthodologiques U2
[U2.01.02] Boundary conditions treated by elimination
[U2.01.04] Documentation of the physical quantities of Code_Aster
[U2.01.05] Stresses, forces and strains
[U2.01.09] Analytical definition of a stress field and an initial field of internal variables
[U2.01.10] Instructions for the choice of finite elements
[U2.01.11] Instructions for the manipulation of fields
[U2.02.01] Operating instructions for plates, shells and SHB elements
[U2.02.02] Operating instructions for pipe elements
[U2.03.04] Instructions for thermo-mechanical and metallurgical calculations on steels
[U2.03.05] Instructions for the numerical simulation of welding
[U2.03.06] A civil engineering calculations with pretensioning cables
[U2.04.01] Conseils d'utilisation de STAT_NON_LINE
[U2.04.02] Conseils de mise en œuvre de calculs non-linéaires
[U2.04.03] Choix du comportement élasto-(visco)-plastique
[U2.04.04] Instructions for use of contact
[U2.04.05] Operating instructions for the THM model
[U2.04.06] How to dig a tunnel : excavation methodology
[U2.04.07] Using methods of transient solving for quasi-static highly nonlinear problems
[U2.04.08] Calculs statiques et dynamiques sur des ouvrages géomécaniques avec la loi de Hujeux restricted access
[U2.05.00] Guide méthodologique sur les approches en mécanique de la rupture
[U2.05.01] Fracture mechanics operators and usage tips
[U2.05.02] Operating Instructions for the X-FEM model
[U2.05.04] Operating instructions for calculating the limit load
[U2.05.05] Calculation of vibration fatigue
[U2.05.06] Performing calculations of damage in quasi-static transient
[U2.05.07] Operating instructions for cohesive zone models
[U2.05.08] Making a calculated prediction of cleavage fracture
[U2.05.09] Notice d'utilisation de la méthode GTP
[U2.06.01] Mise en œuvre d'un calcul de modes propres d'une structure
[U2.06.03] Modeling the mechanical damping
[U2.06.04] Notice for the construction of reduced dynamic models - Applications to the damping
[U2.06.07] Interaction sol-structure (ISS) en analyse sismique avec l'interface Code_Aster - MISS3D restricted access
[U2.06.08] Décollement dynamique de fondation en interaction sol-structure (ISS) par méthode de ressorts de sol restricted access
[U2.06.09] Seismic analysis : application to pipes restricted access
[U2.06.10] Civil engineering calculations with seismic loading
[U2.06.11] Analysis of the seismic resistance of large metalicl tanks
[U2.06.12] Seismic analysis with soil-structure interaction and spatial variability restricted access
[U2.06.13] General tips for using the operator DYNA_NON_LINE
[U2.06.14] Conseils de mise en œuvre des calculs en Interaction Fluide-Structure
[U2.06.21] Interaction sol-structure (ISS) et interaction sol-fluide-structure (ISFS) en analyse sismique avec l'interface Code_Aster - MISS3D restricted access
[U2.06.31] Instructions for gyroscopic calculations
[U2.06.32] Notice de mise en œuvre de calculs de rotors
[U2.07.01] Instructions for the FOURIER modeling
[U2.07.02] Instructions for using the static substructuring
[U2.07.03] Realization of a study of structural modification from the measured data
[U2.07.04] Dynamic condensation of models with static substructuring
[U2.07.05] Mise en œuvre de calcul par sous-structuration dynamique
[U2.07.06] Validation de modèle dynamique par corrélation calcul-essais
[U2.08.01] Using the error indicators and adaptative meshes strategies
[U2.08.03] Operating instructions for linear solvers
[U2.08.04] Instructions for load buckling calculations
[U2.08.05] Numerical simulation of Monte Carlo
[U2.08.06] Operating instructions for parallelism
[U2.08.07] Distribution of parametric calculations
[U2.08.08] The method of manufactured solutions for testing software
[U2.08.09] Adaptation de maillage en non-linéaire
[U2.09.01] Instructions for an analysis of crack noxiousness with the ASPIC skill module restricted access
[U2.09.02] Computation of a bolt-flange assembly
[U2.09.03] Instructions for calculation and post-processing according to RCCM restricted access
[U2.10.01] Instructions for the coupling between Code_Aster and ZMAT/UMAT modules
[U2.51.01] Operating instructions for Grace
[U2.51.02] Plotting curves with Code_Aster
[U3.01.00] Description of the Code_Aster mesh format
[U3.02.01] Interface for the GMSH mesh format with Aster
[U3.03.01] Interface for the IDEAS mesh format with Aster
[U3.04.01] Interface for the GIBI mesh format with Aster
[U3.11.01] POU_D_T, POU_D_E, POU_C_T, BARRE beam models
[U3.11.02] DIS_T and DIS_TR discrete models
[U3.11.03] CABLE and CABLE_POULIE discrete models
[U3.11.04] POU_D_TG, POU_D_TGM beam models
[U3.11.05] POU_D_T_GD beam models
[U3.11.06] TUYAU_3M and TUYAU_6M pipe models
[U3.11.07] POU_D_EM beam models
[U3.12.01] DKT - DST - Q4G - DKTG plate and shell models
[U3.12.02] COQUE_C_PLAN, COQUE_D_PLAN, COQUE_AXIS plate and shell models
[U3.12.03] COQUE_3D plate and shell models
[U3.12.04] GRILLE and GRILLE_MEMBRANE plate and shell models
[U3.12.05] SHB plate and shell models
[U3.13.01] AXIS, D_PLAN, C_PLAN models
[U3.13.02] AXIS_FOURIER models for mechanical analysis
[U3.13.05] AXIS_SI, D_PLAN_SI, C_PLAN_SI models
[U3.13.07] AXIS_INCO, D_PLAN_INCO models
[U3.13.09] 2D_DIS_T et 2D_DIS_TR models
[U3.13.12] D_PLAN_ABSO models
[U3.13.13] 2D_FLUI_ABSO models
[U3.13.14] *JOINT, *ELDI and *INTERFACE models
[U3.14.01] 3D and 3D_SI mechanical models
[U3.14.02] 3D_FLUIDE, FLUI_STRU, 2D_FLUI_PESA models
[U3.14.06] 3D_INCO models
[U3.14.07] 3D_HM, 3D_HHM, 3D_THM, 3D_THH, 3D_THHM models
[U3.14.09] 3D_ABSO models
[U3.14.10] 3D_FLUI_ABSO models
[U3.14.11] 3D_GRAD_EPSI models
[U3.22.01] COQUE, COQUE_PLAN, COQUE_AXIS for thermical analysis
[U3.23.01] AXIS, PLAN, AXIS_DIAG and PLAN_DIAG for thermical analysis
[U3.23.02] AXIS_FOURIER models for thermical analysis
[U3.24.01] 3D and 3D_DIAG models for thermical analysis
[U3.33.01] 3D and PLAN models for the ACOUSTIQUE phenomenon
[U4.01.00] How to read the documentation of commands
[U4.01.02] News and modifications in version 6
[U4.01.03] News and modifications in version 7
[U4.01.04] News and modifications in version 8
[U4.01.05] News and modifications in version 9
[U4.01.06] Nouveautés et modifications de la version 10
[U4.03.01] Title and subtitle of a concept
[U4.11.01] Procedure DEBUT
[U4.11.02] Procedure FIN
[U4.11.03] Procedure POURSUITE
[U4.12.03] Procedure DEFI_FICHIER
[U4.13.01] Procedure INCLUDE
[U4.13.04] Operator INFO_EXEC_ASTER
[U4.14.01] Operator DETRUIRE
[U4.14.02] Opérateur COPIER
[U4.15.01] Procedure MAJ_CATA
[U4.15.12] Operator DEBUG
[U4.21.01] Operator LIRE_MAILLAGE
[U4.22.01] Operator DEFI_GROUP
[U4.23.01] Operator DEFI_MAILLAGE
[U4.23.02] Operator CREA_MAILLAGE
[U4.23.03] Operator ASSE_MAILLAGE
[U4.23.04] Operator MODI_MAILLAGE
[U4.23.05] Operator DEFI_PART_FETI
[U4.24.01] Operator DEFI_SQUELETTE
[U4.24.02] Operator DEFI_GRILLE
[U4.25.01] Operator DEFI_FLUI_STRU
[U4.26.01] Operator DEFI_GEOM_FIBRE
[U4.31.01] Operator DEFI_CONSTANTE
[U4.31.02] Operator DEFI_FONCTION
[U4.31.03] Operator DEFI_NAPPE
[U4.31.05] Operator FORMULE
[U4.32.01] Operator CALC_FONC_INTERP
[U4.32.02] Operator LIRE_FONCTION
[U4.32.03] Operator RECU_FONCTION
[U4.32.04] Operator CALC_FONCTION
[U4.32.05] Operator INFO_FONCTION
[U4.32.11] Macro-command MACR_SPECTRE
[U4.32.21] Operator CALC_SPEC
[U4.33.01] Operator IMPR_FONCTION
[U4.33.02] Operator CREA_TABLE
[U4.33.03] Procedure CALC_TABLE
[U4.34.01] Operators DEFI_LIST_REEL
[U4.34.02] Procedure DEFI_LIST_ENTI
[U4.34.03] Operator DEFI_LIST_INST
[U4.35.01] Operator DEFI_FONC_FLUI
[U4.35.02] Operator FONC_FLUI_STRU
[U4.36.01] Operator LIRE_INTE_SPEC
[U4.36.02] Operator DEFI_INTE_SPEC
[U4.36.03] Operator CALC_INTE_SPEC
[U4.36.04] Opérateur GENE_ACCE_SEISME
[U4.36.05] Operator GENE_FONC_ALEA
[U4.36.06] Operator GENE_MATR_ALEA
[U4.36.07] Operator GENE_VARI_ALEA
[U4.41.01] Operator AFFE_MODELE
[U4.41.02] Operator MODI_MODELE
[U4.41.11] Operator MODI_MODELE_XFEM
[U4.42.01] Operator AFFE_CARA_ELEM
[U4.42.02] Macro-command MACR_CARA_POUTRE
[U4.42.03] Operator DEFI_COQU_MULT
[U4.42.04] Macro-command DEFI_CABLE_BP
[U4.42.05] Macro-command CALC_PRECONT
[U4.42.06] Operator DEFI_GLRC
[U4.42.07] Opérateur DEFI_MATER_GC
[U4.43.01] Operator DEFI_MATERIAU
[U4.43.02] Procedure INCLUDE_MATERIAU
[U4.43.03] Operator AFFE_MATERIAU
[U4.43.04] Operator DEFI_TRC
[U4.43.06] Operator DEFI_COMPOR
[U4.44.01] Operators AFFE_CHAR_MECA et AFFE_CHAR_MECA_F
[U4.44.02] Operators AFFE_CHAR_THER et AFFE_CHAR_THER_F
[U4.44.03] Operators AFFE_CHAR_CINE et AFFE_CHAR_CINE_F
[U4.44.04] Operator AFFE_CHAR_ACOU
[U4.44.05] Operator AFFE_CHAR_MECA_C
[U4.44.11] Operator DEFI_CONTACT
[U4.44.12] Operator CREA_RESU
[U4.44.14] Macro-command MACR_ECLA_PG
[U4.44.21] Operator DEFI_OBSTACLE
[U4.44.22] Operator MODI_OBSTACLE
[U4.44.31] Operator DEFI_SPEC_TURB
[U4.50.01] Keyword SOLVEUR
[U4.51.01] Operator MECA_STATIQUE
[U4.51.02] Macro-command MACRO_ELAS_MULT
[U4.51.03] Operator STAT_NON_LINE
[U4.51.10] Operator CALCUL
[U4.51.11] Non linear constitutive laws
[U4.51.12] Macro-command SIMU_POINT_MAT
[U4.52.01] Procedure IMPR_STURM
[U4.52.02] Macro-command MACRO_MODE_MECA
[U4.52.03] Operator MODE_ITER_SIMULT
[U4.52.04] Operator MODE_ITER_INV
[U4.52.05] Operator MODE_ITER_CYCL
[U4.52.10] Macro-command CALC_MODAL
[U4.52.11] Operator NORM_MODE
[U4.52.12] Operator EXTR_MODE
[U4.52.13] Operator CALC_AMOR_MODAL
[U4.52.14] Operator MODE_STATIQUE
[U4.52.15] Operator MAC_MODES
[U4.52.16] Opérateur CALC_CORR_SSD
[U4.52.51] Operator CALC_MODE_ROTATION
[U4.52.52] Macro-command IMPR_DIAG_CAMPBELL
[U4.53.01] Operator DYNA_NON_LINE
[U4.53.02] Operator DYNA_LINE_TRAN
[U4.53.03] Opérateur DYNA_VIBRA
[U4.53.11] Operator DYNA_LINE_HARM
[U4.53.21] Operator DYNA_TRAN_MODAL
[U4.53.22] Operator DYNA_ALEA_MODAL
[U4.53.23] Operator DYNA_SPEC_MODAL
[U4.53.31] Operator DYNA_ISS_VARI
[U4.54.01] Operator THER_LINEAIRE
[U4.54.02] Operator THER_NON_LINE
[U4.54.03] Operator THER_NON_LINE_MO
[U4.55.01] Operator FACTORISER
[U4.55.02] Operator RESOUDRE
[U4.61.01] Operator CALC_MATR_ELEM
[U4.61.02] Operator CALC_VECT_ELEM
[U4.61.03] Operator CALC_CHAR_CINE
[U4.61.11] Operator NUME_DDL
[U4.61.21] Macro-command MACRO_MATR_ASSE
[U4.61.22] Operator ASSE_MATRICE
[U4.61.23] Operator ASSE_VECTEUR
[U4.62.01] Operator MACR_ELEM_STAT
[U4.62.02] Operator DEPL_INTERNE
[U4.63.01] Operator CALC_CHAR_SEISME
[U4.63.11] Macro-command MACRO_PROJ_BASE
[U4.63.12] Operator PROJ_MATR_BASE
[U4.63.13] Operator PROJ_VECT_BASE
[U4.63.14] Operator PROJ_SPEC_BASE
[U4.63.22] Operator REST_SPEC_PHYS
[U4.63.31] Operator REST_GENE_PHYS
[U4.63.32] Operator REST_SOUS_STRUC
[U4.63.33] Operator REST_COND_TRAN
[U4.63.34] Operator REST_SPEC_TEMP
[U4.64.01] Operator DEFI_INTERF_DYNA
[U4.64.02] Operator DEFI_BASE_MODALE
[U4.65.01] Operator MACR_ELEM_DYNA
[U4.65.02] Operator DEFI_MODELE_GENE
[U4.65.03] Operator NUME_DDL_GENE
[U4.65.04] Operator ASSE_MATR_GENE
[U4.65.05] Operator ASSE_VECT_GENE
[U4.65.11] Operator CREA_ELEM_SSD
[U4.65.12] Operator ASSE_ELEM_SSD
[U4.66.01] Operator CALC_MATR_AJOU
[U4.66.02] Operator CALC_FLUI_STRU
[U4.66.03] Operator CALC_FORC_AJOU
[U4.66.11] Macro-command MACRO_MATR_AJOU
[U4.66.21] Operator MODI_BASE_MODALE
[U4.71.00] Select of one or more fields in a data structure RESULTAT
[U4.71.02] Operator RECU_TABLE
[U4.71.03] Operator RECU_GENE
[U4.71.04] Operator EXTR_RESU
[U4.71.05] Operator EXTR_TABLE
[U4.72.01] Operator COMB_MATR_ASSE
[U4.72.04] Operator CREA_CHAMP
[U4.72.05] Operator PROJ_CHAMP
[U4.72.06] Operator PROD_MATR_CHAM
[U4.73.01] Operator PROJ_MESU_MODAL
[U4.73.02] Macro-command MACR_RECAL
[U4.74.01] Operator MODI_REPERE
[U4.81.03] Operator CALC_CHAM_ELEM
[U4.81.04] Operator CALC_CHAMP
[U4.81.05] Operator POST_CHAMP
[U4.81.06] Operator CALC_ERREUR
[U4.81.11] Operator INTE_MAIL_2D
[U4.81.12] Operator INTE_MAIL_3D
[U4.81.13] Operator MACR_LIGN_COUPE
[U4.81.21] Operator POST_RELEVE_T
[U4.81.22] Operator POST_ELEM
[U4.81.23] Operator POST_COQUE
[U4.81.31] Tool for interactive postprocessing STANLEY
[U4.81.41] Operator POST_BORDET
[U4.81.42] Operator CALC_FERRAILLAGE
[U4.82.01] Operator DEFI_FOND_FISS
[U4.82.02] Operator CALC_THETA
[U4.82.03] Operator CALC_G
[U4.82.04] Operator POST_RUPTURE
[U4.82.05] Operator POST_K1_K2_K3
[U4.82.06] Operator RECA_WEIBULL
[U4.82.07] Operator POST_K_BETA
[U4.82.08] Operator DEFI_FISS_XFEM
[U4.82.09] Macro-commande CALC_GP
[U4.82.11] Operator PROPA_FISS
[U4.82.21] Operator POST_MAIL_XFEM
[U4.82.22] Operator POST_CHAM_XFEM
[U4.82.30] Operator POST_K_TRANS
[U4.83.01] Operator POST_FATIGUE
[U4.83.02] Operator CALC_FATIGUE
[U4.83.11] Operator POST_RCCM
[U4.83.31] Operator COMB_FOURIER
[U4.84.01] Operator COMB_SISM_MODAL
[U4.84.02] Operator POST_DYNA_MODA_T
[U4.84.03] Operator POST_FATI_ALEA
[U4.84.04] Operator POST_DYNA_ALEA
[U4.84.05] Operator POST_USURE
[U4.84.11] Operator POST_DECOLLEMENT
[U4.84.21] Operator CALC_FORC_NONL
[U4.85.01] Operator CALC_META
[U4.86.01] Procedure POST_ENDO_FISS
[U4.90.01] Macro-command CALC_ESSAI
[U4.90.02] Macro-command MACRO_EXPANS
[U4.90.03] Macro-command OBSERVATION
[U4.90.11] Opérateur CALC_MAC3COEUR
[U4.90.12] Opérateur POST_MAC3COEUR
[U4.90.13] Macro-commande PERM_MAC3COEUR
[U4.90.21] Opérateur CALC_ESSAI_GEOMECA
[U4.91.01] Procedure IMPR_RESU for 'RESULTAT' and 'ASTER' formats
[U4.91.02] Procedure IMPR_GENE
[U4.91.03] Procedure IMPR_TABLE
[U4.91.11] Procedure IMPR_CO
[U4.91.12] Procedure INFO_RESU
[U4.91.21] Procedure IMPR_JEVEUX
[U4.92.01] Procedure TEST_RESU
[U4.92.02] Procedure TEST_FONCTION
[U4.92.03] Procedure TEST_TABLE
[U4.92.04] Procedure TEST_FICHIER
[U4.92.05] Procedure TEST_TEMPS
[U4.92.06] Procedure TEST_COMPOR
[U4.92.11] Procedure ENGENDRE_TEST
[U4.CF.10] Macro-command MACR_ASCOUF_MAIL
[U4.CF.20] Macro-command MACR_ASCOUF_CALC
[U4.MK.10] Operator DEFI_FONC_ELEC
[U4.PC.10] Macro-command MACR_ASPIC_MAIL
[U4.PC.20] Macro-command MACR_ASPIC_CALC
[U7.00.01] Operator EXEC_LOGICIEL
[U7.01.01] Procedure PRE_IDEAS
[U7.01.11] Procedure PRE_GIBI
[U7.01.21] Operator LIRE_MAILLAGE (FORMAT='MED')
[U7.01.31] Procedure PRE_GMSH
[U7.02.01] Operator LIRE_RESU
[U7.02.02] Operator LIRE_CHAMP
[U7.02.03] Operator LIRE_TABLE
[U7.02.11] Operator LIRE_PLEXUS
[U7.02.31] Operator LIRE_MISS_3D
[U7.02.32] Operator LIRE_IMPE_MISS
[U7.02.33] Operator LIRE_FORC_MISS
[U7.02.34] Operator DEFI_SOL_MISS
[U7.03.01] Macro-command MACR_ADAP_MAIL
[U7.03.02] Macro-command MACR_INFO_MAIL
[U7.03.03] Python methods for controlling GMSH
[U7.03.10] Macro-command CALC_EUROPLEXUS
[U7.03.11] Macro-command MACRO_MISS_3D
[U7.03.12] Operator CALC_MISS
[U7.03.41] Procedure MACR_ECREVISSE
[U7.03.51] Macro-command RAFF_XFEM
[U7.03.61] Opérateur CHAINAGE_THM
[U7.04.11] Procedure IMPR_MISS_3D
[U7.04.33] Procedure IMPR_MACR_ELEM
[U7.04.51] Operator IMPR_OAR
[U7.05.01] Procedure IMPR_RESU au format 'IDEAS'
[U7.05.11] Procedure IMPR_RESU au format 'CASTEM'
[U7.05.21] Procedure IMPR_RESU (FORMAT 'MED')
[U7.05.32] Procedure IMPR_RESU au format ‘GMSH’
[U7.06.01] Operator CALC_IFS_DNL
[U7.06.11] Operator ENV_CINE_YACS
[U7.06.21] Operator RECU_PARA_YACS
[U7.06.22] Operator MODI_CHAR_YACS
[U7.06.23] Operator IMPR_MAIL_YACS