Welcome to the forums. Please post in English or French.

You are not logged in.

#1 2017-09-06 15:51:44

jlpaladini
Member
Registered: 2016-10-19
Posts: 10

Error in Parallel Code_Aster 13.4 Installation

Hello, I'm Jorge from Argentina, sorry for my bad english. I have a problem on the installation of parallel version of Code_Aster 13.4 in Linux Mint 18. I install OK OpenBLAS 0.2.20, compile Code_Aster 13.4 in sequential mode, ScaLAPACK 1.0.3 and MUMPS 5.1.1. When I try to install the parallel version of Code_Aster I have a error, and I don't know what to do. I attach the error to this post.

Regards, Jorge.


Attachments:
error, Size: 9.39 KiB, Downloads: 17

Offline

#2 2017-09-07 21:10:23

GXA_William
Member
Registered: 2016-04-30
Posts: 5

Re: Error in Parallel Code_Aster 13.4 Installation

Hello.

I had the same issue which I solved as follows on a Linux Ubuntu 16.04 machine.

First step - source the following in a terminal session:

    ASTER_ROOT=/opt/aster 
    source $ASTER_ROOT/13.4/share/aster/profile_mfront.sh

Second step - add the following line to your *.py file:

    self.env.TFELHOME = '/opt/aster/public/mfront-3.0.0'

Third step - configure and install using waf.

Kind regards,

-William

Offline

#3 2017-09-08 16:01:55

jlpaladini
Member
Registered: 2016-10-19
Posts: 10

Re: Error in Parallel Code_Aster 13.4 Installation

Thanks William
I try it, but I have an error in the installation. I attach my 2 configure files and the error file. Can you send to me your *.py??

Regards, Jorge


Attachments:
error.tar.gz, Size: 2.6 KiB, Downloads: 9

Offline

#4 2017-09-08 18:57:18

GXA_William
Member
Registered: 2016-04-30
Posts: 5

Re: Error in Parallel Code_Aster 13.4 Installation

Hello Jorge.

Attached are the python files which worked on my machine; had the exact same issue as you are experiencing.

Note that I had to first install sequential 13.4, then source the MFront shell file, then run waf with the MFront path added to the *.py file.  Doing that got me through the configure stage.

The waf install brought a new set of problems and after several days of compilation-error madness I gave up on a PETSC enabled install.  Installation went fine once I excluded PETSC from the install.

Wish you luck; let us know if you succeed.

-William


Attachments:
pythonFiles.tar.gz, Size: 894 B, Downloads: 15

Offline

#5 2017-09-12 19:42:43

jlpaladini
Member
Registered: 2016-10-19
Posts: 10

Re: Error in Parallel Code_Aster 13.4 Installation

Thanks Williams, I complete the configuration but I have an error in the installation. I attach this error.

Regards, Jorge


Attachments:
error3, Size: 6.2 KiB, Downloads: 10

Offline

#6 2017-09-14 16:32:48

GXA_William
Member
Registered: 2016-04-30
Posts: 5

Re: Error in Parallel Code_Aster 13.4 Installation

Hello Jorge.

There are a few threads in the forum which address this error; believe it is related to correctly referencing metis and/or scotch headers in the configuration files.

One thread you can search for is #18240, titled "Fail to run a calculation with MUMPS" (forum is not letting me post a link; just search for 18240 or the title and the thread will pop up).  Hopefully this will give you direction to resolve the error.

-William

Offline

Board footer